Abstract
dc:descriptionThis bachelor‘s thesis investigates electrostatic MEMS relays MM5130 and MM5230 manufactured by Menlo Microsystems. The main objective of the work was to evaluate the operation of these MEMS relays as switching devices and to analyse their electrical and dynamic characteristics. The study included measurements of contact resistance as a function of control voltage, investigation of the influence of voltage between relay contacts on the control voltage for switching-on, and measurements of turn-on and turn-off times at different control voltage. The experimental results showed that the contact resistance depends on the control voltage. Higher control voltage reduced the switching time at voltages manufacturer recommended 90 V. Additional experiments were performed using a boost switching circuit and a long-term lifetime test. During high-cycle operation, the MM5230 relay was driven at 100 V and 10 kHz. The relay operated for approximately 25 billion switching cycles before failure. This corresponds to about 83% of the manufacturer’s stated 30 billion cycle value and confirms that the measured lifetime is consistent with the declared relay performance. The results demonstrate that electrostatic MEMS relays can provide low contact resistance, fast switching, and very high endurance. However, the experiments also showed that MEMS contacts are sensitive to overload conditions, contact bounce and mechanical degradation during long-term operation.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Lunkevič, Vladislavas,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD308117245&prefLang=en_US