Back to search

Institutional Repository of Vilnius University

Elektrinio plazminio Holo variklio kanale vykstančių elektromagnetinių reiškinių skaitinis modeliavimas /

Abstract

dc:description

The increasing demand for small satellites and deep-space missions is driving the need for low-power (200–500 W) electric propulsion systems. One of the most widely used solutions is the Hall Effect Thruster (HET), valued for its high specific impulse and reliability. However, conventional propellants such as xenon are relatively expensive and require complex supply systems, which motivates the search for alternative propellants, including bismuth. This bachelor’s thesis focuses on the numerical simulation of electromagnetic processes in a Hall thruster channel using bismuth vapor as the propellant. The work was carried out in collaboration with the Lithuanian company "Uvireso", specializing in digital twins and testing for space propulsion systems. The main objective of the thesis was to investigate how bismuth vapor pressure and initial electron kinetic energy influence the operation of a low-power Hall thruster. To achieve this, a three-dimensional numerical model of the thruster was developed in CST Studio Suite using the electrostatic Particle-in-Cell (PIC) method combined with Monte Carlo Collisions (MCC) to represent ionization and collision processes. In addition, a reference (theoretical) model based on analytical expressions from the literature and defined thruster operating conditions was used to estimate key plasma parameters and provide benchmark values for comparison with simulation results. The developed numerical model enables the analysis of beam current behavior and spatial and temporal variations of ion velocity, as well as the investigation of the ionization zone structure and charge distribution within the channel. The results show that the model is capable of capturing the main physical trends of Hall thruster operation and reproduces the ion velocity ratio between different propellants (bismuth and xenon), consistent with the reference model. Simulations performed for bismuth vapor pressures ranging from 0.1 to 0.4 Torr demonstrate that the beam current in the ionization region increases approximately 7.5 times (from 1.3 nA to 9.8 nA), which is consistent with results reported in the literature. In addition, it was observed that the initial electron kinetic energy (1–15 eV) has a direct influence on the beam current, which increases by up to 30% as the energy approaches the maximum ionization cross-section of bismuth (15 eV). At the same time, it was found that the ion velocity (1600 m/s) is significantly lower than the value predicted by the reference model (13580 m/s), independently of vapor pressure and initial electron energy, indicating that further optimization of the magnetic field configuration and PIC numerical conditions is required. Reducing the simulation time step to 28 ps would improve numerical stability, albeit at higher computational cost. The model provides a solid basis for further refinement and captures the key physical processes of Hall thruster operation.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Adomaitis, Vincentas,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Adomaitis, Vincentas,. Elektrinio plazminio Holo variklio kanale vykstančių elektromagnetinių reiškinių skaitinis modeliavimas /. Institutional Repository of Vilnius University, 2026. https://repository.vu.lt/VU:ELABAETD308117455&prefLang=en_US