Back to search

Institutional Repository of Vilnius University

Femtosekundinio lazerinio apdirbimo indukuotos paviršiaus taršos mechanizmo tyrimas naudojantis laikinės skyros mikroskopijos metodais /

Abstract

dc:description

Precise material processing using laser radiation remains a crucial task in modern photonics and high-tech industries. Although femtosecond pulses ensure high-quality material ablation, using low repetition rate pulses leads to the contamination of the ablated material surface with particles. This degrades surface quality and increases its roughness. In this work, the dynamics of these particles during the ablation of fused silica are investigated using time-resolved microscopy techniques. The study aims to determine the specific time instances when the particle density in the air after abla- tion reaches its peak and when the particles settle back onto the sample surface. Additionally, the influence of shock waves on particle dynamics at low pulse repetition rates is evaluated. To analyze the dynamics of particle ejection from the sample, digital holography was applied using a modified Mach-Zehnder interferometer, where the first beam splitter divides the beam into reference and object waves. Holograms are reconstructed via the convolution method for different focal planes, and a digital algorithm based on the minimum transmittance principle was used for particle detection. It was found that when using 60 𝜇𝐽 femtosecond pulses, the maximum particle concentration is reached approximately 1,2 𝜇𝑠 after the pulse interacts with the material. Particle ejection from the sample is a delayed process compared to the propagation of shock waves, whose velocity drops to the speed of sound in air within 0,4 𝜇𝑠. Shadowgraphy was applied to monitor particle deposition, allowing the recording of particles located within a single focal plane (i.e., already deposited). Particles remaining above the samp- le (undeposited) remain out of focus, and are therefore rejected by the detection algorithm. For each time delay prior to ablation, a reference frame is recorded using only the probe pulse, whi- ch is subsequently subtracted from the frame captured after ablation. Non-zero values indicate a change—specifically, particle deposition onto the sample surface. The main results of this work are summarized in the following conclusions: 1. When ablating fused silica with 60 𝜇𝐽 energy, 211 𝑓𝑠 duration, and 1030 𝑛𝑚 wavelength pulses with a beam diameter of 39 𝜇𝑚, the shock wave transforms into an acoustic wave after 0, 4 𝜇𝑠, and during this time interval, it travels approximately 0, 3 𝑚𝑚. 2. The time intervals (10-20 𝜇𝑠) during which we can observe particle dynamics in the space above the sample through holography experiments are too short to be used to explain changes in material contamination with characteristic durations in the late-time delay regime (>50 𝜇𝑠). 3. The time interval between pulses when clean machining begins to be observed (100 𝜇𝑠) is greater than the lifetime of the particles in the air (25-30 𝜇𝑠); therefore, the interaction between already deposited particles and shock waves should be time-dependent. 4. When processing the surface at high repetition rates, effective blowing away of deposited dust is visible after just a few pulses, indicating that it is not baked onto the surface by the laser radiation.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Blužas, Emilis,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Blužas, Emilis,. Femtosekundinio lazerinio apdirbimo indukuotos paviršiaus taršos mechanizmo tyrimas naudojantis laikinės skyros mikroskopijos metodais /. Institutional Repository of Vilnius University, 2026. https://repository.vu.lt/VU:ELABAETD308117500&prefLang=en_US