Back to search

Institutional Repository of Vilnius University

Lazerinis nerūdijančio plieno lakštų pjovimas: greičio didinimas optimizuojant parametrus /

Abstract

dc:description

Laser cutting of thin stainless-steel sheets is widely used in modern industry due to its high precision, flexibility, and ability to process components with complex geometries. However, one of the main limiting factors of this technology remains insufficient cutting speed, which directly determines manufacturing productivity and profitability. Therefore, it is important to identify the key parameters that determine the maximum laser cutting speed and to develop reliable methods for predicting and 30 optimizing this speed. Recent theoretical studies have proposed an analytical model that relates the maximum cutting speed to laser radiation and material parameters; however, the experimental validation and practical application of this model under real processing conditions remain limited due to assumptions not accounted for in the model, such as pulse-to-pulse interaction, debris redeposition, and plasma shielding effects. The aim of this work was to experimentally investigate the main factors determining the cutting speed of thin stainless-steel sheets and to verify the applicability of the theoretical model for process parameter optimization. A diode-pumped solid-state laser with a wavelength of 1064 nm was used, operating in two pulse regimes: nanosecond (4.5 ns) and picosecond (13 ps), at a pulse repetition rate of 400 kHz. Experiments were performed on 0.3 mm thick martensitic stainless steel (7C27Mo2) sheets by systematically varying the laser fluence, focus position, and beam diameter in order to determine optimal cutting conditions. The cutting process was analyzed by evaluating the ablation threshold fluence, penetration depth, cutting speed, and cutting quality. Experimental results showed that the maximum cutting speed is achieved not exactly at the focal position but under slight beam defocusing, where the fluence still exceeds the ablation threshold while the processed area becomes larger. These conditions increase the removed material depth per scanning step and consequently improve cutting speed. The maximum cutting speeds obtained were 31 mm/s using nanosecond pulses and 14 mm/s using picosecond pulses. The obtained results were in good agreement with the theoretical model predictions, confirming that the optimized Gaussian beam radius and laser fluence are key factors enabling the maximization of cutting speed. It was also found that there exists an optimal fluence 𝐹0optand beam radius 𝑤0opt, at which the cutting process is most efficient; increasing the fluence beyond this optimum does not improve performance due to saturation effects. A comparison of nanosecond and picosecond laser cutting regimes demonstrated that both have their specific application domains depending on technological requirements: nanosecond pulses are more suitable for high-throughput industrial cutting, whereas picosecond pulses are preferable for highprecision micromachining where a minimal heat-affected zone is required. The results of this work can be applied to the optimization of laser metal processing technologies in electronics, medical device manufacturing, the automotive sector, and other high-technology industries.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Brundza, Lukas,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Brundza, Lukas,. Lazerinis nerūdijančio plieno lakštų pjovimas: greičio didinimas optimizuojant parametrus /. Institutional Repository of Vilnius University, 2026. https://repository.vu.lt/VU:ELABAETD308117523&prefLang=en_US