Back to search

Institutional Repository of Vilnius University

Radioaktyviųjų metalinių atliekų lazerinio deaktyvavimo tyrimas /

Abstract

dc:description

Ignalina nuclear power plant in Lithuania was decommissioned in 2009 and now it is in the process of being disassembled and deactivated. To this day, 77 thousand tons of equipment and structural components have been dismantled and 103 thousand more tons remain. Since 99% of the power plant's waste is classified as being of very low, low or medium radioactivity, effective deactivation and recycling of large amounts of waste could be achieved. Laser surface ablation can be used to deactivate radioactive metal surfaces and it is a prospective alternative to currently used sand blasting, which generates secondary waste. The goal of this thesis was to test the feasibility of using a laser-based surface cleaning system for deactivating contaminated metal surfaces. Three tasks were outlined -- conduct a literature review on the decontamination of radioactive waste using laser radiation, investigate the effectiveness of cleaning metal surfaces using laser radiation, taking into account optical and scanning parameters as well as surface preparation, evaluate the effectiveness of radioactive waste deactivation. Initial experimentation focused on analyzing the depth of the layer of metal removed by laser ablation. Different numbers of scans. It was found that the depth of surface ablation increases as a logarithmic function of the number of scans, while the ablation rate decreases gradually as the number of scans increases. In order to increase the effectiveness of the ablation process, rusted metal specimens were wetted with water or 80% ethanol solution and compared to control dry samples. It was discovered that surface wetting before laser ablation increased the efficiency, samples wetted with water demonstrated up to 55 +/- 13% increased efficiency at 10 scans. Laser deactivation was performed at the Ignalina Nuclear Power Plant using six metal test samples. Gamma spectrometry showed that during the cleaning process, radionuclides (Cs-137, Co-60) are effectively removed from the surface and deposited in the aerosols collected inside the decontamination chamber. On average, a reduction of 44% of radioactive activity was observed with the samples, the activity of Cs-137 decreased by 38%, but only by 25% for Co-60. Using MPPD (multiple-path particle dosimetry) software, the deposition of produced aerosols in the human respiratory system was simulated. It was discovered that while a majority of inhaled particles settled in the head cavity region (nasal septum, mouth), some aerosols generated during cleaning are fine enough to penetrate deep into the lungs, therefore, appropriate safety measures are essential during cleaning, as inhaled radioactive particles can accumulate in the lungs and cause adverse health effects. In conclusion, it can be stated that laser cleaning of metal surfaces is a promising, safe and practically suitable alternative method for the deactivation of metal radioactive waste, however personal protective equipment is necessary to avoid inhalation of potentially dangerous radioactive aerosols.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Haist, Jonas Jeffrey,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Haist, Jonas Jeffrey,. Radioaktyviųjų metalinių atliekų lazerinio deaktyvavimo tyrimas /. Institutional Repository of Vilnius University, 2026. https://repository.vu.lt/VU:ELABAETD308118314&prefLang=en_US