Back to search

Institutional Repository of Vilnius University

Advanced materials for electrochemical water splitting in alkaline media /

Abstract

dc:description

Electrochemical water splitting is regarded as a promising sustainable technology capable of producing high-purity hydrogen gas via two crucial half-reactions: the cathodic hydrogen evolution reaction (HER) and the anodic oxygen evolution reaction (OER). Currently, alkaline electrolysis of water is regarded as the most promising approach for large-scale green hydrogen production. The CoPx/Cu (0.4–11 wt% P), CoFeP/Cu, PdCoP/Cu, PdCoFeP/Cu, PtCoP/Cu, and PtCoFeP/Cu electrocatalysts in this study have been successfully developed through straightforward methods combining electroless deposition and galvanic displacement. The HER and OER catalytic activities were assessed in a three-electrode cell using 1 M KOH, while the overall water splitting (OWS) performance was evaluated in a two-electrode electrolyzer under both laboratory-scale conditions and industrially relevant temperatures (25–75 °C). It has been found that CoPx/Cu (0.4–11 wt% P), CoFeP/Cu, PdCoP/Cu, PdCoFeP/Cu, PtCoP/Cu, and PtCoFeP/Cu electrocatalysts demonstrated superior performance for the HER, OER, and OWS in alkaline media. In the case of CoPx catalysts, the phosphorus content was identified as a crucial factor influencing the electrocatalytic performance of cobalt phosphide coatings. CoP11/Cu showed the most promising HER activity, with an overpotential of 98.9 mV at 10 mA cm⁻2, while CoP8/Cu exhibited the most effective OER performance, requiring 378 mV at 10 mA cm⁻2 in 1 M KOH. The electrocatalytic activity of CoP and CoFeP catalysts was significantly improved by surface modification with a small amount of Pd or Pt through galvanic displacement. Among the Pd-modified catalysts, PdCoP/Cu demonstrated the most favourable HER performance, exhibiting an overpotential of 250 mV at 10 mA cm⁻2. Moreover, PdCoP/Cu and PdCoFeP/Cu exhibited enhanced OER activity, requiring an overpotential of 396 mV at 10 mA cm⁻2 in 1 M KOH. The incorporation of Fe into the coatings resulted in enhanced catalytic activity and stability, attributable to the modification of coating composition and surface characteristics. PtCoP/Cu demonstrated remarkable HER activity, exhibiting an overpotential of merely 46 mV at 10 mA cm⁻2, while PtCoFeP/Cu evidenced superior OER performance, with an overpotential of 322 mV at 10 mA cm⁻2, thereby substantiating the synergistic influence of Fe incorporation and Pt modification on the electrocatalytic performance. It was found that the PtCoFeP(+) ‖ PtCoP(–) configuration demonstrated the outstanding OWS performance, requiring a low voltage of only 1.63 V at 25 °C and 1.54 V at 75 °C to achieve 10 mA cm⁻2 in 1 M KOH, thus indicating its remarkable potential for practical application in industrial alkaline water electrolysis at relevant operating temperatures. The developed CoP11/Cu, PdCoP/Cu, PdCoFeP/Cu, PtCoP/Cu, and PtCoFeP/Cu electrocatalysts exhibited electrochemical stability under alkaline conditions. Chronopotentiometry revealed potential shifts of 18.6 mV and 18.9 mV at a current density of 10 mA cm⁻2 for PdCoP/Cu and PdCoFeP/Cu, respectively, after 10 hours, respectively. Meanwhile, PtCoP/Cu and PtCoFeP/Cu exhibited shifts of only 1.2 mV and 1.5 mV, respectively, at a current density of 10 mA cm⁻2 after 15 hours. Furthermore, PdCoFeP/Cu demonstrated a remarkable retention of 96.02% of its initial current, whereas CoP11/Cu exhibited consistent operation throughout 15 hours at a constant potential of –0.26 V. Additionally, CoP11/Cu demonstrated high stability following 1,000 cycles of accelerated degradation testing. Electroless deposition and galvanic displacement can be regarded as a facile, cost-effective, and scalable method for the production of highly efficient cobalt phosphide-based electrocatalysts. These materials have the potential to serve as efficient candidates for hydrogen production via alkaline water electrolysis, particularly under industrial operating conditions.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Amber, Huma,
Contributors dc:contributor
  • Tamašauskaitė Tamašiūnaitė, Loreta

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
eng

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Amber, Huma,. Advanced materials for electrochemical water splitting in alkaline media /. Institutional Repository of Vilnius University, 2026. https://repository.vu.lt/VU:ELABAETD332448789&prefLang=en_US