Virginia Tech
Modification and Upcycling of Polyetherimide, Polystyrene, Polyethylene, and Polypropylene
Abstract
dc:description.abstractPolymer modification and degradation are two important focuses in polymer chemistry. Polymer modification is widely utilized in industrial practices to endow new properties, generally through crosslinking, copolymerization, grafting, and blending based on the unique polymer structures, properties, and demands. For example, polyetherimide (PEI) is a high-performance polymer with good thermal and mechanical properties, playing essential roles in aerospace, defense technology, space exploration, and transportation. However, poor processibility, solvent resistance, and inert polymer structure have limited the PEI for broader applications. Therefore, it is imperative to investigate modification chemistry and develop new properties of PEIs. In this dissertation, we have introduced copolymerization and crosslinking chemistry to PEI and investigated the influencers on the PEI properties. Besides polymer modification, polymer degradation gets increasingly important due to the environmental crisis and plastic pollution problem. Selectively transferring commodity plastics to high-value chemicals, or upcycling, is gaining traction due to the high profitability, investment attractiveness, and ability to recycle different grades of plastic wastes, from primary to end-of-life plastics. However, successful upcycling with good product selectivity is challenging because of the absence of widely accepted upcycling theories/methodologies. Fuels, gasoline, waxes, BTX aromatics (benzene, toluene, xylenes), and other low-value organics are common upcycling products in literature with slim chance to cover the cost of waste collection and recycling. In this dissertation, a new plastic upcycling method, the degradation-upcycling strategy (Deg-Up) is presented. PS is selectively converted to diphenylmethane, benzophenone, bibenzyl, or 4-oxo-4-phenyl butyric acid; PE and PP are upcycled to fatty acids. Batch reaction, preliminary industrial design, and techno-economic analysis on the PS Deg-Up have exhibited a high potential strategy for upcycling plastic wastes. Nonsolvent induced phase separation (NIPS) of polymers is often used to generate porous material with controllable pore size or pore volume. NIPS membranes often possess a mesoporous skin layer and a microporous bottom layer. The mechanical properties of the NIPS films are often fragile at a dry state. Polymer films operation often faces extreme conditions (e.g., high temperature and tension), and therefore must be thermally stable and mechanically strong to operate durably. To obtain a free-standing porous film with good mechanical and thermal properties, we studied the preparation of mesoporous films from poly(4-vinylpyridine)-block-poly(ether imide)-block-poly(4-vinylpyridine) (P4VP-b-PEI-b-P4VP) triblock copolymers. The mesopores are generated through a nonsolvent induced phase separation process. Thanks to the high-performance PEI block, the mesoporous films are thermally stable up to the Tg of P4VP block (150 °C). Mechanical strength of P4VP-b-PEI-b-P4VP film is much higher than existing polystyrene-based mesoporous films. Essentially, with a low molecular weight of 27.7 kDa, the porous P4VP-b-PEI-b-P4VP films showed a tensile strength at break of 10.5 MPa and toughness of 0.68 MPa. In addition, the sizes and specific surface areas of the mesopore in P4VP-b-PEI-b-P4VP films are tunable. The development of poly(ether imide)-based porous films provides an effective method for preparing thermally stable and mechanically strong membranes for extreme-condition operations. Poly(ether imide) (PEI) has good solubility in common organic solvents, such as chloroform, dimethylformamide, dichloromethane, and N-methyl pyrrolidone. Exposure to organic solvents severely compromises PEI films' mechanical and thermal performances. Herein, we report a method for preparing thermally crosslinked PEI (X-PEI) with improved solvent resistance. X-PEI is prepared from azide-terminated PEI (N3-PEI-N3) synthesized via a one-pot diazotization-azidation reaction of amine-terminated PEI. After crosslinking, X-PEI affords unprecedented solvent resistance and solution processability unrivaled by counterpart high-performance polyimides. Thermal properties, mechanical properties, and solvent resistance are significantly improved. In addition, the film properties (i.e., glass transition temperature, storage modulus, and swelling ratio) show positive dependence on the X-PEI crosslinking density, as determined by the molar mass and azide concentration of N3-PEI-N3. An optimal N3-PEI-N3 molecular weight of ~9 kDa is identified, showing the highest crosslinking density. This work advances the chemistry of high-performance polymers. The method is generic and applicable to other engineering polymers. Plastic waste represents one of the most urgent environmental challenges in the 21st century. With an annual production near 400 million tons, only ~10% of plastics are recycled annually. Among these plastics are mostly polyolefins, including polyethylene (37%), polypropylene (30%), poly(vinyl chloride) (15%), and polystyrene (10%). Mechanical recycling and energy recovery are two primary strategies for plastic waste management, although they often possess low profitability and high market sensitivity. Upcycling has been proposed to provide higher profitability and more diverse chemical products. However, existing upcycling methods operate under energy-intense conditions and use precious-metal catalysts but produce low-value oligomers, monomers, and common aromatics. Herein, a tandem degradation-upcycling strategy (Deg-Up) is reported to exploit high-value chemicals from PS, PE, and PP waste with high selectivity. The Deg-Up comprises two steps: a degradation reaction converting plastic waste to intermediates; one or a series of upcycling reactions converting the intermediate selectively to the target molecules. First, the Deg-Up of PS consists of degradation to aromatics using UV light and upcycling of the intermediate to diphenylmethane. Degradation and upcycling reactions are catalyzed over low-cost AlCl3 at ambient temperatures under atmospheric pressure. With low-value-input and high-value-output, The Deg-Up approach is economically more viable and more sustainable than conventional processes operating at high-temperature, high-pressure conditions or using precious-metal catalysts but producing low-value chemicals. The cascade strategy is generalizable to other high-value chemicals (e.g., benzophenone, 1,2-diphenylethane, and 4-phenyl-4-oxo butyric acid). The PS upcycling to diphenylmethane is tested at a 1-kg scale and examined by industrial-scale techno-economic analysis, showing sustainability and economic viability without government subsidies or tax credits. Second, PE and PP Deg-Up to surfactants consist of a thermal degradation at 360 ℃ to waxes and an upcycling of the waxy intermediate to fatty acid over manganese stearate (MnSt2) at 150 ℃ in air. PP degradation thermodynamically and kinetically favors ꞵ-scission over PE degradation, producing primary olefin wax, while mainly paraffin wax in the PE degradation. The degradation atmosphere is an important influencer on wax upcycling reaction. Partially oxidized waxes, i.e., PE degradation in N2/O2 with 10 vol% O2 and PP degradation in air, show both high wax yield (> 80 wt.%) and fast oxidation (< 10 h). In both PE- and PP-derived waxes, the concentration of the unsaturated carbon decreased with the oxidation, while the carboxyl carbon intensified, producing a good acid number range for PE- (80-100 mgKOH/g) and PP- derived fatty acid (160-170 mgKOH/g).
Degree
thesis:*- Name thesis:degree_name
- Doctor of Philosophy
- Level thesis:degree_level
- doctoral
- Discipline thesis:degree_discipline
- Chemistry
- Department dc:contributor.department
- Chemistry
- Grantor dc:publisher
- Virginia Tech
- Year dc:date.issued
- 2022
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Xu, Zhen
- Chair dc:contributor.committeechair
-
- Liu, Guoliang
- Committee members dc:contributor.committeemember
-
- Madsen, Louis A.
- Long, Timothy E.
- Cheng, Shengfeng
Subjects
dc:subject × 7Rights
dc:rights- Statement dc:rights
-
- In Copyright
- Licence dc:rights.uri
- Language dc:language.iso
- en
Identifiers
dc:identifier.*- Dc Identifier Other
- vt_gsexam:35655