Back to search

Virginia Polytechnic Institute

A graphical analysis of symmetrically loaded shells of revolution

Abstract

dc:description.abstract

This investigation concerns the evaluation of an approximate method to obtain membrane stresses and deformations for symmetrically loaded surfaces of revolution. Due to the simplicity of the presented method, it is particularly practical for shells of revolution of unusual shape whose “exact” solutions are lengthy and involved. Since the bus of a pin-jointed space structure or truss, when loaded at its joints, will be subjected to axial stresses or forces only, such a structure can efficiently used to approximate the behavior of a shell of similar shape and supported in such a manner as to be in membrane stress condition. If a surface of revolution is imaginarily lined with parallel and meridian circles, the surface will now be composed of small curved surface areas. The joints of the analogous space structure are located at the center of each one of these small surface areas. The bars of this space structure are oriented along the meridian and parallel circles. The equivalent loads on the structure are obtained from the corresponding plane areas of each joint. Three types of simple shells with known theoretical solutions for the membrane stresses are analyzed by this method, and the results are compared to the theoretical values in order to evaluate the accuracy of the graphical method. In one of these examples, the deformations of the shell are also compared using both approximate and theoretical values. The comparative results and relative errors are tabulated for the various problems worked. Finally, limitations of this method and recommendations for its further development and use in the general theory of shells, including unsymmetrical loads, are included.

Degree

thesis:*
Name thesis:degree_name
M.S.
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Structural Engineering
Department dc:contributor.department
Structural Engineering
Grantor dc:publisher
Virginia Polytechnic Institute
Year dc:date.issued
1959

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Aranguren Lerner, Antonio

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language.iso
en

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/10919/139955

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Aranguren Lerner, Antonio. A graphical analysis of symmetrically loaded shells of revolution. masters thesis, Virginia Polytechnic Institute, 1959. https://hdl.handle.net/10919/139955