Back to search

Virginia Polytechnic Institute and State University

A simplified method for determining hob offset values in the design of nonstandard spur gears

Abstract

dc:description.abstract

A typical problem which a mechanical designer might encounter concerns the design of a set of spur gears for a predetermined center distance which is not considered standard. The design of these gears can be accomplished by determining the value that a standard cutter can be moved in or withdrawn from its normal cutting position such that when the pinion and gear are out they will operate at the required center distance when meshed together. The design problem, however, is trying to establish what values of cutter offset should be used to cut the pinion and the gear so that the standard cutter may be used. Several authors have shown the derivation for a mathematically correct relationship which will give the sum of the hob offsets for the pinion and the gear. The major problems is that there is no second mathematical expression whereby it is possible to solve explicitly for either hob offset of the pinion or the hob offset of the gear. Accordingly, the object of this investigation was to develop a method for determining the hob offset of the inion and of the gear so that the gears would operate properly at the required predetermined center distance. The following result can be reached from this investigation: The equation needed so that the hob offsets, e<sub>1</sub> and e<sub>2</sub>, can be determined explicitly should be based on approximately equal bending tooth tresses of the pinion and of the gear with the load applied at the tip of the tooth.

Degree

thesis:*
Name thesis:degree_name
M.S.
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Mechanical Engineering
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Virginia Polytechnic Institute and State University
Year dc:date.issued
1971

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Walsh, Edward James
Chair dc:contributor.committeechair
  • Mabie, H. H.
Committee members dc:contributor.committeemember
  • Hurst, C. J.
  • Padis, L. A.

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language.iso
en

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/10919/139990

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Walsh, Edward James. A simplified method for determining hob offset values in the design of nonstandard spur gears. masters thesis, Virginia Polytechnic Institute and State University, 1971. https://hdl.handle.net/10919/139990