Abstract
dc:description.abstractPurpose of the Study: Surface cleaning is an important step in various types of processing such as thin film deposition and adhesion. There are a wide variety of surface contaminants ranging from oxide layers on metals to physisorbed gases on solid surfaces. Hydrocarbon contaminants adsorbed from the ambient are common to all surfaces exposed to the atmosphere. The methods used to achieve atomically clean surfaces usually are very tedious and impractical for routine production line service. On the other hand, technologically clean surfaces for engineering processes can be obtained easily via the various types of gas plasma treatment commercially available. In commercial practice the etching/ashing action of a plasma often results primarily from the formation of volatile compounds from the highly reactive plasma speci.es interacting chemically with the solid surface being treated, rather than from thermal effects or the physical sputtering action of the impinging energetic ions and atoms. This study was concerned with the evaluation of the surface cleaning efficiency of Ar and O<sub>2</sub> electrolessly-generated glow discharges in two types of apparatus. An extensive review of the literature was conducted in order to identify the possible mechanisms of action in each case. Procedure: High purity titanium in thin foil form was used in the as-received condition without any further mechanical polishing, chemical or solvent degreasing prior to plasma treatments. Two types of electroless glow discharges from high frequency r.f. generators were the ion sources used in the plasma treatments. Both argon (normal) and oxygen (reactive) plasmas were used. Titanium surfaces were treated separately in both types of plasma for various times, then surface compositions were monitored by ESCA and water contact angle measurements. In the ESCA technique, binding energies of the electrons ejected from inner shells of surface atoms irradiated with x-rays were measured. The binding energy (Eb) of the core electron emitted in this excitation process identifies the atomic constituents, and peak intensities are proportional to their concentration. Surface cleanliness also was evaluated by observing the water contact angles with a contact angle goniometer. Findings: Titanium thin foil treated by Tesla coil r.f. backsputtering suffered the disadvantage of recontamination from the surrounding apparatus although some removal of hydrocarbon layers was obtained. Technologically clean Ti surfaces were achieved by plasma etching. In this high-pressure operation (1 torr) the physical sputtering yield was drastically reduced or eliminated, thus the etching must be attributed to chemical-plasma reactions that converted the surface hydrocarbon
Degree
thesis:*- Name thesis:degree_name
- M. Eng.
- Level thesis:degree_level
- masters
- Discipline thesis:degree_discipline
- Materials Engineering
- Department dc:contributor.department
- Materials Engineering
- Grantor dc:publisher
- Virginia Polytechnic Institute and State University
- Year dc:date.issued
- 1979
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Kiang, Wei Ricky
- Chair dc:contributor.committeechair
-
- Dwight, D. W.
- Committee members dc:contributor.committeemember
-
- Lytton, J. L.
- Wightman, J. P.
Subjects
dc:subject × 2Rights
dc:rights- Statement dc:rights
-
- In Copyright
- Licence dc:rights.uri
- Language dc:language.iso
- en
Identifiers
dc:identifier.*- Handle dc:identifier.uri
- https://hdl.handle.net/10919/141428