Back to search

Virginia Tech

Design and Assessment of an Embedded Die PCB-Based Traction Inverter

Abstract

dc:description.abstractgeneral

Electric vehicles rely on electronic hardware that converts stored battery energy into controlled power for the motor. This hardware, called an inverter, must be inexpensive, highly efficient, and compact. National targets call for very high efficiency, high power per unit volume, and low cost. This work focuses on reaching the required power-density target by redesigning how the inverter's switching devices are built into the circuit board. Embedding the semiconductor devices directly into the board allows the use of lower-voltage versions of the same device type, which reduces electrical resistance and cuts energy loss. The embedded approach also supports faster switching, which further improves efficiency. A low-cost current-measurement method is also developed so that an expensive sensor normally used in commercial inverters can be removed. Two embedded die PCB prototypes are compared with standard industrial designs. The embedded versions reduce physical volume substantially and show better behavior in electrical switching, heat flow, and electromagnetic noise. A compact current-sensing coil is then designed directly into the circuit board. It measures rapid current changes and steady operating current with high accuracy, enabling the removal of the conventional Hall-effect sensor. Finally, these design principles are used to build a high-power inverter that reaches the targeted power density while operating under load.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Electrical Engineering
Department dc:contributor.department
Electrical Engineering
Grantor dc:publisher
Virginia Tech
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Spieler, Matthias
Chairs dc:contributor.committeechair
  • Burgos, Rolando
  • Dong, Dong
Committee members dc:contributor.committeemember
  • Dimarino, Christina Marie
  • Wang, Anbo
  • Lu, Guo Quan

Subjects

dc:subject × 5

Rights

dc:rights
Statement dc:rights
  • Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language.iso
en

Identifiers

dc:identifier.*
Dc Identifier Other
vt_gsexam:45528

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Spieler, Matthias. Design and Assessment of an Embedded Die PCB-Based Traction Inverter. doctoral thesis, Virginia Tech, 2026. https://hdl.handle.net/10919/142396