Back to search

Virginia Tech

Merged Half-Bridge 48V/1V Voltage Regulator

Abstract

dc:description.abstract

Data center processors and xPUs are moving toward higher current and lower supply voltage, making the 48V point-of-load (PoL) voltage regulator increasingly important. Although the 48V bus reduces distribution loss, direct 48V-to-1V conversion remains challenging because the converter must simultaneously achieve a high step-down ratio, high output current, high efficiency, and compact layout. Existing two-stage solutions can reuse mature 12V multiphase buck technology, but the cascaded power conversion, intermediate bus current, and additional decoupling capacitors limit further improvement in efficiency and power density. Therefore, this thesis investigates a single-stage 48V voltage regulator based on a merged half-bridge converter with current-doubler rectification (MHB-CDR). The proposed topology reduces the effective primary side voltage applied to the transformer by merging two asymmetrical half-bridge cells, allowing a practical transformer turns ratio for 48V-to-1V conversion. The current-doubler rectifier (CDR) splits the large output current into two interleaved current paths and reducing secondary side current stress. To realize the proposed topology in hardware, a printed circuit board (PCB) transformer is designed and optimized. Core loss, winding loss, PCB layout and device loss are evaluated. Since core loss is not the dominant limitation in the present design, the transformer optimization focuses on winding resistance and PCB implementation. Different magnetic core design and PCB winding arrangements are compared to reduce total power stage loss. Finally, hardware prototypes are built and tested to verify the proposed design. The proposed converter achieves a measured peak efficiency of 90.48% for 48V-to-1V conversion. Efficiency at different switching frequencies and input-output conditions are also analyzed. Comparative prototypes, including an asymmetric half-bridge converter and a stacked half-bridge converter, are also evaluated to demonstrate the advantages of the proposed MHB-CDR. The results show that the proposed topology achieves higher efficiency under heavy-load conditions, making it a promising single-stage solution for high-conversion-ratio, high-output-current 48V point-of-load applications.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Electrical Engineering
Department dc:contributor.department
Electrical Engineering
Grantor dc:publisher
Virginia Tech
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yang, Kaisen
Chair dc:contributor.committeechair
  • Li, Qiang
Committee members dc:contributor.committeemember
  • Dimarino, Christina Marie
  • Zhu, Liyan

Subjects

dc:subject × 3

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language.iso
en

Identifiers

dc:identifier.*
Dc Identifier Other
vt_gsexam:46660

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Yang, Kaisen. Merged Half-Bridge 48V/1V Voltage Regulator. masters thesis, Virginia Tech, 2026. https://hdl.handle.net/10919/143476