Virginia Tech
Experimental Investigation of an Ultra-Small Pelton Turbine for Ultra-Low Water Head Applications: A Proof of Concept
Abstract
dc:description.abstractgeneralWater wheels and turbines have been used for centuries to generate power from flowing water. Modern hydropower plants rely on water falling from great heights, often hundreds of meters, and achieve very high efficiency. However, many everyday water sources, such as household plumbing, building drainage systems, and agricultural chan- nels, involve water dropping through only a meter or two of elevation. This research explored whether a small water turbine could work effectively with such minimal water height differences. Before settling on a final design, four different turbine concepts were built and tested in sequence. The first was a wind-turbine-inspired rotor that proved unsuitable for a concentrated water stream. Two intermediate versions helped identify the problems of air bubbles in the pipes and water splashing off the wrong type of turbine bucket. Each failure pointed directly to the next improvement. The final design used a 3D-printed turbine with 15 double-cup buckets—the standard shape used in large industrial water turbines, adapted here to a scale that fits in one hand. The turbine was tested with water dropping from heights between approximately 2.5 feet and 4.4 feet (0.762 to 1.33 meters)—far below what conventional turbines typi- cally require. The tests measured how much power the turbine could produce and how iii efficiently it converted the water's energy into mechanical rotation. Two test campaigns were run on the same turbine; the second showed lower performance because the plastic parts had worn down during the first campaign. This gave a useful range: the turbine produced 1.7 to 3.4 watts of power, with efficiencies of 42–51% in the worn state and 60–70% when fresh. An important finding was that air bubbles mixing into the water supply pipes significantly reduced performance, which points to a clear priority for future designs: keep air out of the system. The power levels produced here are small, but they are exactly what the available water height and flow rate allow—this is an expected result for a first test of this kind. Making this approach practical at the household level will require further work on how to collect and store water before it reaches the turbine, how to connect a small generator to the shaft, and whether the energy recovered would be worth the cost of the system. This proof-of-concept study provides the first experimental data for Pelton turbines at such low heads, and documents the design process from first concept to working prototype
Degree
thesis:*- Name thesis:degree_name
- Master of Science
- Level thesis:degree_level
- masters
- Discipline thesis:degree_discipline
- Mechanical Engineering
- Department dc:contributor.department
- Mechanical Engineering
- Grantor dc:publisher
- Virginia Tech
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Zohre, Berker
- Chair dc:contributor.committeechair
-
- Untaroiu, Alexandrina
- Committee members dc:contributor.committeemember
-
- Chambers, Benjamin Daniel
- Boreyko, Jonathan Barton
Subjects
dc:subject × 7Rights
dc:rights- Statement dc:rights
-
- Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
- Licence dc:rights.uri
- Language dc:language.iso
- en
Identifiers
dc:identifier.*- Dc Identifier Other
- vt_gsexam:46344