Back to search

Virginia Tech

Pulse-Driven Microfluidic Pumps for Transdermal Drug Delivery and Material Investigation of PDMS and 3D Printing Resins

Abstract

dc:description.abstract

Nowadays, pharmaceuticals such as insulin, vaccines, chemotherapeutics, and analgesics still need to be delivered across the skin using relatively invasive subcutaneous cannulas coupled with either powered pumps or syringes. Although these techniques have been shown to be promising over the years, they have significant limitations, including but not limited to injection site pain and discomfort, infections, interference with daily activities, cost, and embarrassment. Considering this, we have developed a novel technology of wrist-worn, pulse-driven microfluidic pumps. We fabricated our devices with polydimethylsiloxane (PDMS), refined our device prototype in 12 design generations, and evaluated the performance of these pumps. We examined the flow rate generated by these devices using a pressurized air pulse simulator and on the wrists of 116 healthy human subjects. Linear mixed models that correlate the pulse-driven flow rate with device and user parameters were constructed, suggesting that the flow rate generated was positively correlated with the width and membrane area of the main flow channel and enhanced by wrist motion. In addition, both wicking with polyester wipes and transdermal delivery with porcine skin significantly increased the flow rate produced by our devices. We developed and performed three related studies to better understand how material properties potentially impact the performance of our devices. Various designs of 3D-printed hollow microneedle arrays were fabricated and investigated for transdermal penetration and mechanical strength. We found that syringe-shaped microneedle arrays with Formlabs Surgical Guide resin can effectively penetrate porcine skin without a risk of microneedle fracture. In addition, we filled a gap in research by characterizing the natural aging of PDMS at five base-to-curing agent mixing ratios and six mild storage environments at room temperature. PDMS at all mixing ratios was found to slightly increase in surface hydrophobicity, and PDMS in some mixing ratios and storage environments exhibited drastically increased stiffness and brittleness. We found that storage underwater can help preserve hydrophilicity and mechanical strength of PDMS. We also tested the effect of post-print treatment conditions of stereolithographic (SLA) 3D printing resins on the curing of their PDMS replica, which suggested that heat treatment followed by a post-washing step of negative master molds can enhance the channel geometry fidelity, surface smoothness, and mechanical strength of cast-molded PDMS. Throughout this project, we have collected preliminary data to confirm the feasibility of our devices as a platform technology for drug delivery. Future work includes developing our technology for specific drug delivery applications and for cardiac waveform detection.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Biomedical Engineering
Department dc:contributor.department
Department of Biomedical Engineering and Mechanics
Grantor dc:publisher
Virginia Tech
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Zhang, Shuyu
Chair dc:contributor.committeechair
  • Staples, Anne E.
Committee members dc:contributor.committeemember
  • Socha, John
  • Davalos, Rafael V.
  • Vlaisavljevich, Eli
  • Muelenaer, Andre Albert

Subjects

dc:subject × 10

Rights

dc:rights
Statement dc:rights
  • Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language.iso
en

Identifiers

dc:identifier.*
Dc Identifier Other
vt_gsexam:47567

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Zhang, Shuyu. Pulse-Driven Microfluidic Pumps for Transdermal Drug Delivery and Material Investigation of PDMS and 3D Printing Resins. doctoral thesis, Virginia Tech, 2026. https://hdl.handle.net/10919/143744