Virginia Tech
Experimental and Computational Characterization of a Hydrofoil System for a Retrofit Inflatable Boat Platform
Abstract
dc:description.abstractThe Center for Marine Autonomy and Robotics at Virginia Tech has been contracted by the Office of Naval Research to design, test, and validate a hydrofoil retrofit kit for a rigid- hull inflatable boat, using fully submerged, flapped hydrofoils to improve small-craft speed and ride quality. The fore foil of this system was first characterized analytically, then measured directly in a tow tank across a wide matrix of speed, incidence, and flap deflection. A three-dimensional CFD model of the isolated foil was developed and validated against these measurements. The validated model was then extended to the complete, integrated starboard-side foil system, and used to evaluate a strut fairing and a wingtip endplate as drag-reduction and lift-recovery devices. The fairing was found to increase lift and reduce drag at the same time, while the endplate recovered further lift at a moderate drag cost. Together, these results indicate good potential for hydrofoil retrofits of this kind. However, full validation of the craft's dynamic takeoff behavior would require further development of a coupled fluid-body simulation and real world testing of the complete system.
Degree
thesis:*- Level thesis:degree_level
- masters
- Department dc:contributor.department
- Mechanical Engineering
- Grantor dc:publisher
- Virginia Tech
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Joshi, Keyur Sachin
- Chair dc:contributor.committeechair
-
- Fuller, Christopher R.
- Committee members dc:contributor.committeemember
-
- Brizzolara, Stefano
- Stilwell, Daniel J.
Subjects
dc:subject × 3Rights
dc:rights- Statement dc:rights
-
- In Copyright
- Licence dc:rights.uri
- Language dc:language.iso
- en
Identifiers
dc:identifier.*- Dc Identifier Other
- vt_gsexam:47681