Back to search

Virginia Tech

Molten Salt Fuel Redox Control Mechanism and In-Situ Redox Measurements

Abstract

dc:description.abstract

Molten fluoride salts are an essential fuel candidate for Molten Salt Reactors (MSRs), highlighted as one of the six reactor concepts under Generation IV designs. Redox control in molten fluoride salts is a fundamental requirement to suppress structural material corrosion and to protect core material integrity at high temperature operation conditions. However, redox control is not a fixed parameter, it requires to be defined, monitored, and sustained by salt- and operation-specific. This dissertation investigates (I) the upper and lower limit boundaries of the redox control by trifluoride solubility as a lower limit constraint, first time in literature, as contrast to uranium carbide formation which has been commonly used, (II) three thermodynamic reference electrode designs (two out of three new designs) for in-situ redox measurements via electrochemical methods, (III) addressing redox control effect on molten salt thermal diffusivity and melting temperature and (IV) UF3 (redox buffer component) chemical and thermal instability reaction/interactions in the redox control frame which was only defined in the LiF-containing salt systems. The fuel salt of NaF-BeF2-UF4-ZrF4 and the redox control of salt buffer introduction method (UF4/UF3) has been chosen to demonstrate the investigation. The present dissertation enhances the understanding of redox control applications in molten fluoride salts by including conceptual framework improvements, providing repeatable thermodynamic monitoring electrodes, and identifying the multiple chemical interactions phenomena of redox control on salt chemistry. The upper limit of the redox control which is governed by the structural alloy corrosion (Cr dissolution) as common to literature, on the other side, the lower limit is defined as homogeneous fuel salt integrity. The lower limit boundary, first time is defined as collective trifluoride solubility in molten fluoride fuel salt. Multiple trifluorides (e.g. UF3, CeF3, LaF3) in the melt shows that the fuel salt has the limited trifluoride solubility rather than component-specific solubility which raises the lower limit of redox control frame and brings the narrower operation window. During the operation of molten salt reactor, the redox control is bound to change due to fission, material depletion which requires continuous in-situ monitoring. To overcome this challenge, the current dissertation represents three thermodynamic reference electrode designs, Ni/NiF2 and orifice-contact Pb/U and Pb/PbF2 electrodes. The development and validation of three electrodes was investigated in non-fuel and fuel conditions in molten fluoride environments. All designs demonstrated repeatable, materials-compatible measurements in either fluoride salts system by utilizing open circuit potential and cyclic voltammetry methods. The effects of redox control in molten salt systems beyond suppressing the corrosion have been researched by determining thermal diffusivity and melting temperature in various concentrations of redox buffer. Laser flash analysis and differential scanning calorimetry methods used respectively, and the increased UF3 concentration revealed increase in thermal diffusivity and melting temperature. These findings demonstrate for the first time that redox buffer can alter the molten salt properties as compared to non-redox controlled salt. Finally, previously identified UF4/UF3 redox buffer to be between 10 to 100 (in LiF-containing systems) was re-examined and found that higher concentration of UF3 (or lower ratio of UF4/UF3) shows multiple instability mechanisms as disproportionation into UF4 and U0, precipitation in multiple trifluoride presence, thermal depletion, and history dependent behavior. These results indicate that historically derived redox windows for LiF-bearing salt and cannot capture the fuel framework for NaF-containing salt systems. Under the light of these findings, this dissertation reframes redox control in molten salt reactors as a dynamic process, that must be investigated under multiple operation dimensions, measured online, and the history of molten fuel salt operation must be recorded. The methodology, online measurement electrode designs, and stability mechanisms identified here provide a transferable framework for establishing redox control in NaF-containing fuel salts.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Nuclear Engineering
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Virginia Tech
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Karakaya, Nagihan
Chair dc:contributor.committeechair
  • Zhang, Jinsuo
Committee members dc:contributor.committeemember
  • Lin, Feng
  • Haghighat, Alireza
  • Liu, Yang

Subjects

dc:subject × 5

Rights

dc:rights
Statement dc:rights
  • Creative Commons Attribution-NoDerivatives 4.0 International
Language dc:language.iso
en

Identifiers

dc:identifier.*
Dc Identifier Other
vt_gsexam:47487

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Karakaya, Nagihan. Molten Salt Fuel Redox Control Mechanism and In-Situ Redox Measurements. doctoral thesis, Virginia Tech, 2026. https://hdl.handle.net/10919/143815