Back to search

Virginia Tech

Deployment Load Estimation of Composite Tape Spring Spacecraft Booms Using Reverse Engineering and Data-Driven Rational Approximation

Abstract

dc:description.abstract

Deployable composite tape spring booms have become ubiquitous for small satellite missions. While these booms offer compact and self-deploying structural solutions, their uncontrolled deployment generates mechanical shocks that threaten delicate spacecraft components. Therefore, understanding the structural dynamics of the booms has been a growing area of interest. As a first step towards deployment-induced shock load estimation, this study characterizes the dynamics of a parabolic composite tape spring boom using an experimental modal analysis and finite element (FE) modeling workflow. This initial work details the testing setup, evaluation procedures, modeling results and uncertainties. To minimize geometric uncertainty, a highly accurate scanned point cloud model was evaluated against standard discrete cross-section models. Furthermore, the FE model based on the point cloud approach closely matched the experimental natural frequencies and mode shapes of the first four fundamental resonant modes, demonstrating a significant improvement in accuracy compared to the idealized constant cross-section baseline. However, the results indicate that further refinement of boundary condition modeling could improve correlation for higher-order modes, providing a valuable direction for model improvement. Subsequently, advanced data-driven modeling techniques, including vector fitting and the parametric Adaptive Antoulas-Anderson (p-AAA) algorithm, are used to analyze experimental frequency response functions. By constructing numerical models directly from experimental frequency responses, these methods bypass explicit modeling of physical parameters necessary for high-fidelity FE models. These data-driven models are validated using test signals and then used to estimate the deployment loads of the boom using transfer function inversion. Experimental testing revealed load-dependent nonlinearity where the structure's fundamental bending mode frequency shifted with an increase in input load amplitude. Cross-validation demonstrated poor predictive performance when a model trained at a specific load level was applied to different loading conditions, proving that non-parametric methods lack the generalization required for varying dynamic loads. Addressing these limitations, a parametric modeling framework using the p-AAA algorithm was implemented and compared to the non-parametric load-specific models. Experimental validation was transitioned to a shaker table configuration with closed-loop control to better replicate end-of-deployment shocks by applying model-predicted forces. During physical deployment-induced impulse response replication, the vibration control system successfully matched the target acceleration profiles in both the time and frequency domains. The output velocity response also closely matched the actual deployment velocity response of the boom. However, isolating the parametric model from hardware limitations revealed that fundamental differences between the constant amplitude sine-sweep testing and transient deployment dynamics still present challenges in perfectly replicating the physical events. Finally, the effects of temperature on deployment dynamics, including changes in velocity, deployment time, and natural frequencies, are investigated through experiments conducted in thermal vacuum and ambient conditions. While the physical testing was constrained to a sparse dataset of discrete temperature points, the parametric model successfully captured the system's behavior within this available data. However, internal holdout testing results highlighted the need for additional temperature data points to improve interpolation performance of the model. By discussing these model limitations and exploring future validation steps, this work emphasizes the critical role of data-driven techniques in understanding the effects of uncontrolled deployments in the space environment. This work advances the predictive modeling of deployable space structures through three primary contributions. First, it quantified that mitigating geometric uncertainty via 3D scanning is essential for accurate modal analysis, reducing frequency errors to under 5% for critical modes. Second, it successfully established a transfer function inversion framework while demonstrating the need for parametric modeling of load-dependent, nonlinear dynamic behaviors across continuous inputs. Finally, it performed closed-loop experimental validation, confirming the parametric model's potential to accurately reconstruct input forces directly from dynamic response data for on-orbit deployment diagnostics.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Aerospace Engineering
Department dc:contributor.department
Aerospace and Ocean Engineering
Grantor dc:publisher
Virginia Tech
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mhadgut, Deven Hemchandra
Chairs dc:contributor.committeechair
  • Kenyon, Samantha Parry
  • Phoenix, Austin Allen
Committee members dc:contributor.committeemember
  • Santer, Matthew
  • Gugercin, Serkan
  • Black, Jonathan T.
  • Kapania, Rakesh K.

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language.iso
en

Identifiers

dc:identifier.*
Dc Identifier Other
vt_gsexam:47696

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Mhadgut, Deven Hemchandra. Deployment Load Estimation of Composite Tape Spring Spacecraft Booms Using Reverse Engineering and Data-Driven Rational Approximation. doctoral thesis, Virginia Tech, 2026. https://hdl.handle.net/10919/143870