Virginia Tech
Failure Analysis and Re-Design of an Electromagnetic Energy Harvesting Railroad Tie
Abstract
dc:description.abstractAdvanced Rail Technologies call for intelligent and autonomous trackside monitoring, signalling and communication equipment. This equipment must be powered where it is installed, and across much of the rail network no power supply exists. The Energy Harvesting Tie developed at the Center for Vehicle Systems and Safety at Virginia Tech captures the vertical deflection of the rail under passing wheels within the enclosure of a standard composite crosstie, converting it through a ball screw and bevel gear stage into unidirectional generator rotation by half-wave mechanical motion rectification. Following instrumented laboratory and revenue-service campaigns, the first-generation prototype was left in track to expose degradation mechanisms inaccessible to short-term testing. At nine months of continuous service, it ceased to produce voltage on any generator phase, abruptly and with no preceding decline. This thesis establishes the cause and develops a second-generation design. Teardown of the recovered unit and a failure modes and effects analysis identify degradation of the one-way clutch cage and sprags as the dominant risk driver, and reconstruct a causal chain of lost sprag positioning, lubrication loss and internally generated debris, axial migration against a compliant polymer locating member, and diversion of transmitted torque into a parasitic frictional path at the gearhead adapter joint. Eight design requirements follow, each traceable to a specific teardown observation. Design loads are derived from the revenue-service displacement record at the electrical operating point imposing the greatest mechanical duty. A nodal torque-propagation model retaining every rotating inertia gives a peak clutch torque of 23.02 N·m at zero stress ratio, an indexing rate of 0.7-1.5 Hz, and a ball-screw axial reaction reaching 11.58 kN and shows that the conventional reduction of freewheeling inertance to the generator rotor and gearhead alone understates it significantly. The redesign mitigates issues concerning race concentricity, axial location and gearhead torque reaction by consolidating the components, using a complete sealed clutch unit located by co-rotating metallic shoulders and a two-point supported eight-fastener generator mount in place of a cantilevered four-fastener arrangement. Every load-bearing member is verified analytically. Testing of the assembled unit over 131 compression events confirms half-wave rectification on consecutive events, validates the drivetrain kinematic chain, and recovers the machine constant in situ, with performance holding up to expectation. Instrumented revenue-service redeployment remains the necessary next step.
Degree
thesis:*- Name thesis:degree_name
- Master of Science
- Level thesis:degree_level
- masters
- Discipline thesis:degree_discipline
- Mechanical Engineering
- Department dc:contributor.department
- Mechanical Engineering
- Grantor dc:publisher
- Virginia Tech
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Jadhav, Advait Vishal
- Chairs dc:contributor.committeechair
-
- Ahmadian, Mehdi
- Southward, Steve C.
- Committee member dc:contributor.committeemember
-
- Warfford, Jeffrey Thomas
Subjects
dc:subject × 9Rights
dc:rights- Statement dc:rights
-
- In Copyright
- Licence dc:rights.uri
- Language dc:language.iso
- en
Identifiers
dc:identifier.*- Dc Identifier Other
- vt_gsexam:47817