Virginia Tech
Using Nacre-Inspired Architecture to Improve the Mechanical Performance of Binder Jetted Parts
Abstract
dc:description.abstractResidual porosity remains a barrier for industrial adoption of additively manufactured metallic parts fabricated through Binder Jetting (BJT), due to its detriment in the mechanical performance. However, local control of the pore structure poses an opportunity to turn an apparent process defect into a design feature for creating architected composites. Nacre is a natural composite that achieves high toughness by directing crack propagation through a softer, more compliant phase, effectively preventing failure in the brittle ceramic material. This research investigates whether a nacre-inspired architecture can be introduced into BJT metal composites to improve toughness relative to conventional, homogeneous parts. Two strategies within a BJT and infiltration workflow were used to control porosity at different length scales: selective binder deposition governs mesoscale porosity by dictating where powder is bound or left loose during printing, while pre-sintering provides control of the microscale porosity by controlling neck formation and pore evolution within each region. This work leverages both controls together to architect distinct infiltration pathways within a single part, producing a Nacre-inspired brick-and-mortar pattern of bronze-lean "Brick" (unbound) and bronze-rich "Mortar" (bound) regions in SS316L and bronze composites. The progression of densification of bound and unbound SS316L powder throughout the sintering process was found to differ, with unbound powder showing an advanced densification because of its greater powder packing density. A pre-sintering temperature of 1250℃ produced the greatest contrast in pore structure while providing a viable, complete infiltration path. Nacre composites were fabricated at this temperature, achieving up to a 9% bronze-content difference between the designed Brick and Mortar sections. Conventionally printed and infiltrated composites outperformed the Nacre composites, with Modulus of Toughness recording values of 0.024 J/mm3 and 0.016 J/mm3, respectively, with stiffness showing no distinction. These results are attributed to large fabrication defects and high residual porosity in the final parts (6.6 – 8.5%), rather than to the tailored architecture itself. This thesis demonstrates a novel method for producing complex architected composites with spatial composition contrast in a BJT and infiltration process, by combining selective binder deposition and a pre-sintering step. Additionally, it develops an image-analysis method applicable to other porosity-based patterns for quantifying such contrast from optical microscopy.
Degree
thesis:*- Name thesis:degree_name
- Master of Science
- Level thesis:degree_level
- masters
- Discipline thesis:degree_discipline
- Mechanical Engineering
- Department dc:contributor.department
- Mechanical Engineering
- Grantor dc:publisher
- Virginia Tech
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Espinosa Borja, Juan Fernando
- Chair dc:contributor.committeechair
-
- Williams, Christopher Bryant
- Committee members dc:contributor.committeemember
-
- Raeymaekers, Bart
- Acar, Pinar
Subjects
dc:subject × 6Rights
dc:rights- Statement dc:rights
-
- In Copyright
- Licence dc:rights.uri
- Language dc:language.iso
- en
Identifiers
dc:identifier.*- Dc Identifier Other
- vt_gsexam:47886