University of Washington
A Device for Rapid, Automated Trimming of Insect-Sized Flying Robots
Abstract
dc:description.abstractSuccessful demonstrations of controlled flight in flying insect-sized robots (FIRs) $<$500~mg have all relied on piezo-actuated flapping wings because of unfavorable downward size scaling in motor-driven propellers. In practice, the mechanical complexity of flapping wings typically results in large torque bias variability about pitch and roll axes, leading to rapid rotation in free flight for vehicles that are not properly trimmed. Manual trimming by watching high-speed video is tedious and error-prone. In this letter, we introduce an alternative, a trimming device that uses feedback from motion capture cameras to determine and correct for bias torques. It does so using an automated feedback loop, without the need for any visual feedback from the user, or airborne flights which can damage the robot. We validated the device on two different robot flies. After trimming with our device, the robots both took off approximately vertically in open-loop and were able to hover in free flight. Our system, therefore, speeds up an essential yet time-consuming step in robot fly fabrication, facilitating their eventual mass production and practical application.
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Dhingra, Daksh
- Advisor dc:contributor.advisor
-
- Fuller, Sawyer Buckminster
Subjects
dc:subject × 6Rights
dc:rights- Statement dc:rights
-
- CC BY
- Language dc:language.iso
- en_US
Identifiers
dc:identifier.*- Handle dc:identifier.uri
- http://hdl.handle.net/1773/45227