University of Waterloo
Characterization and Linearization of 5G mm-Wave Power Amplifiers Using Reduced-Sampling Observation Receiver
Abstract
dc:description.abstractIn this work, an advanced calibration routine is proposed to determine the frequency response of a feedback receiver over a targeted linearization bandwidth, when only sub-Nyquist (aliased) samples are available. A new approach is then devised to apply a direct learning algorithm along with the proposed receiver calibration routine, and thus linearize a millimeter wave power amplifier (PA), driven by a modulated signal, using digital pre-distortion (DPD) with a reduced feedback sampling rate. The proposed new calibration routine and DPD approach are successfully applied to linearize a PA under test, operating at 24 GHz and driven by single carrier 16-QAM and carrier aggregated LTE signals of 200MHz modulation bandwidth using a feedback receiver with sampling rates of 2 Gsps, 1 Gsps and 500 Msps. Adjacent channel power ratio of about 49 dBc and normalized mean square error of about 2% are obtained at the linearized PA output using the three sampling rates.
Degree
thesis:*- Grantor dc:publisher
- University of Waterloo
- Year dc:date.issued
- 2017
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Beltagy, Yehia
- Advisor dc:contributor.advisor
-
- Boumaiza, Slim
Subjects
dc:subject × 5Rights
- Language dc:language.iso
- en
Identifiers
dc:identifier.*- Handle dc:identifier.uri
- http://hdl.handle.net/10012/12189