Back to search

University of Waterloo

Foveated Sampling Architectures for CMOS Image Sensors

Abstract

dc:description.abstract

Electronic imaging technologies are faced with the challenge of power consumption when transmitting large amounts of image data from the acquisition imager to the display or processing devices. This is especially a concern for portable applications, and becomes more prominent in increasingly high-resolution, high-frame rate imagers. Therefore, new sampling techniques are needed to minimize transmitted data, while maximizing the conveyed image information. <br /><br /> From this point of view, two approaches have been proposed and implemented in this thesis: <ol> <li> A system-level approach, in which the classical 1D row sampling CMOS imager is modified to a 2D ring sampling pyramidal architecture, using the same standard three transistor (3T) active pixel sensor (APS). </li> <li> A device-level approach, in which the classical orthogonal architecture has been preserved while altering the APS device structure, to design an expandable multiresolution image sensor. </li> </ol> A new scanning scheme has been suggested for the pyramidal image sensor, resulting in an intrascene foveated dynamic range (FDR) similar in profile to that of the human eye. In this scheme, the inner rings of the imager have a higher dynamic range than the outer rings. The pyramidal imager transmits the sampled image through 8 parallel output channels, allowing higher frame rates. The human eye is known to have less sensitivity to oblique contrast. Using this fact on the typical oblique distribution of fixed pattern noise, we demonstrate lower perception of this noise than the orthogonal FPN distribution of classical CMOS imagers. <br /><br /> The multiresolution image sensor principle is based on averaging regions of low interest from frame-sampled image kernels. One pixel is read from each kernel while keeping pixels in the region of interest at their high resolution. This significantly reduces the transferred data and increases the frame rate. Such architecture allows for programmability and expandability of multiresolution imaging applications.

Degree

thesis:*
Grantor dc:publisher
University of Waterloo
Year dc:date.issued
2005

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Saffih, Fayçal

Subjects

dc:subject × 9

Rights

dc:rights
Statement dc:rights
  • Copyright: 2005, Saffih, Fayçal. All rights reserved.
Language dc:language.iso
en

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/10012/820

Chain of custody

source
Harvested from
University of Waterloo
Base URL
dspacemainprd01.lib.uwaterloo.ca/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Saffih, Fayçal. Foveated Sampling Architectures for CMOS Image Sensors. University of Waterloo, 2005. http://hdl.handle.net/10012/820