Back to search

University of Waterloo

Fabrication of Surface Metal Matrix Composites Using Friction Stir Processing

Abstract

dc:description.abstract

Friction stir processing has been employed to produce metal matrix composites by incorporating reinforcement particles in an Al 5059 matrix. Various particles with sizes from 130 nm to 4.3 um, and different process parameters, were examined to obtain a uniform distribution of particles within the processed region. Mechanical properties (i.e. tensile and microhardness) of the Al 5059 matrix metal matrix composites reinforced with Al2O3, SiC, and B4C were tested and compared. Tensile tests demonstrated increases in yield strength by 20, 32, and 38 percent compared to the matrix alloy for composites containing Al2O3, SiC, and B4C, respectively. The average microhardness value within the stir zone increased from 85 HV in the base material to a maximum of 170 HV in the B4C-reinforced composite. Particle refinement during friction stir processing was more pronounced with micron-sized particles, and virtually insignificant for nano-sized particles. Nano-scale particles seem to be more efficient in increasing the hardness when a similar fraction is used compared to micro-sized particles.

Degree

thesis:*
Grantor dc:publisher
University of Waterloo
Year dc:date.issued
2014

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sahraeinejad, Saman

Subjects

dc:subject × 3

Rights

Language dc:language.iso
en

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/10012/8829

Chain of custody

source
Harvested from
University of Waterloo
Base URL
dspacemainprd01.lib.uwaterloo.ca/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Sahraeinejad, Saman. Fabrication of Surface Metal Matrix Composites Using Friction Stir Processing. University of Waterloo, 2014. http://hdl.handle.net/10012/8829