Back to search

University of Leeds

CFD Modelling of Pathogen Transport due to Human Activity

Abstract

dc:description.abstract

Health-care Associated Infection is a major concern with 1 in 11 patients affected each year. There is evidence that some pathogens may be transported by an airborne route, and hence fluid modelling tools, such as Computational Fluid Dynamics (CFD), are increasingly used to aid understanding of the transport mechanisms of infection. These models tend to only consider respiratory infections that are released from a single point, such as a person coughing. However there is substantial evidence that certain pathogens, such as MRS A, may be released from the skin during regular routine activities (e.g. undressing, walking). An observational and air sampling study carried out on a respiratory ward found that certain activities correlated to greatly increased numbers of large particles (> 5µm), and bioaerosols. The increased concentrations of bioaerosols also corresponded to sampling of potentially pathogenic Staphylococcus aureus. It is therefore necessary to be able to represent these releases ofbioaerosols within CFD models used in design and risk assessment. Bioaerosol transport is modelled in CFD simulations usmg passive scalar transport and Lagrangian particle tracking models with the DRW model to simulate turbulent diffusion. These are validated for the first time using spatial variation of airborne and deposited bioaerosols generated under controlled conditions. Simpler multi-zone models are compared to CFD and found to perform well at simulating the bioaerosol decay within large spaces that can be assumed to be well mixed, however they are not refined enough to simulate the detail required to study the transfer of infection between individual patients. A zonal source model is introduced and validated with the aim of representing the time average dispersion from a transient source in a steady state model. This enables the dispersion of bioaerosols from activities occurring in hospital wards to be represented within CFD models. The zonal source model is shown to give a good representation of the average dispersion and total deposition of a transient source, whereas a point source is not. Point sources produce different dispersion patterns to zonal sources and so it is recommended that both are used to simulate bioaerosols produced due to activities or respiratory diseases. Point sources are found to be highly sensitive to the injection position, whereas the zonal source is found to produce relatively similar patterns of dispersion for varying size definitions. CFD is a useful tool for studying pathogen transport in indoor spaces, and when doing so it is recommended that the potential bioaerosol release from the skin is considered which can be taken into account within a steady state model using a zonal source model.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Leeds
Year dc:date.issued
2008

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hathway, Elizabeth Abigail
Advisors dc:contributor.advisor
  • Noakes, Catherine
  • Sleigh, Andy
  • Ceggs, Clive

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.494110

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Hathway, Elizabeth Abigail. CFD Modelling of Pathogen Transport due to Human Activity. doctoral thesis, University of Leeds, 2008.