Back to search

University of Leeds

Micro-Scale Bio-Inspired Structured Polymer Surfaces for Tissue Adhesion

Abstract

dc:description.abstract

There are many cases when it would be beneficial to provide reliable, reversible adhesion at a tissue-device interface. There are currently many adhesion mechanisms used during surgical procedures such as graspers, vacuum cups and hooks. However, these are known to cause some scale of tissue trauma. This thesis investigates the viability of using a bio-inspired, structured polymer surfaces to provide wet adhesion forces through the formation of liquid bridges on the tip of discrete pillars. The mechanism described involves a contribution from both Stefan forces and capillary forces to provide the total adhesion force. A main factor to this work is the ability to successfully, repeatedly and reliably fabricate polymer surfaces at a micron scale with varying geometry, specifically in terms of pillar spacing. The substrate should be flexible and have the ability to tune the wettability. A number of lithography techniques have been explored for a range of polymers, finally settling on a nano-imprint lithography technique with Poly (dimethylsiloxane) (PDMS) as the polymer. Experimental adhesion tests have been performed and it has been found, that for such an adhesion mechanism to be successful, an optimal contact angle must be reached. If the contact angle is too high, repulsive forces in convex menisci will form and the adhesion will be low as a result. If the contact angle is too low, the capillary length : pillar height ratio results in the surface acting super-hydrophobic and completely wetting the pillars, preventing the formation of liquid bridges, and again resulting in low adhesion, it is proposed that such a mechanism would occur at contact angles lower than 50°. A mathematical model has been investigated, encompassing both the Stefan and adhesion forces and the limitations of this have been discussed in relation to the complexity of this system.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Leeds
Year dc:date.issued
2015

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bell, Ashley Marie
Advisors dc:contributor.advisor
  • Neville, Anne
  • Gaskell, Phillip. H

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.680537

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Bell, Ashley Marie. Micro-Scale Bio-Inspired Structured Polymer Surfaces for Tissue Adhesion. doctoral thesis, University of Leeds, 2015.