Back to search

University of Sheffield

Incorporation of molybdenum in nuclear waste glasses.

Abstract

dc:description.abstract

Alkali borosilicate glasses have been widely used as a matrix for the vitrification of high level radioactive waste (HLW) over the last 40 years. Increasing the waste loading of the HLW glasses could increase the efficiency of the vitrification process, but could also increase the tendency for devitrification, which could have a negative effect on the overall properties of the glass. Molybdenum (found in many HLW compositions) has a low (~1 wt%) solubility in borosilicates, and when present in higher concentrations in HLW melts, tends to combine with other elements from the HLW to form crystalline material phases termed "yellow phase". Yellow phase (a mixture of alkali molybdates, chromates and sulphates) increases the corrosion rate of the Inconel melting furnaces used in HLW vitrification in the UK, and can be water soluble in the solid state. It is therefore undesirable in a product that may eventually come into contact with ground water in an underground storage repository. Simulated (non-radioactive) HLW glasses have been melted in various atmospheres, with a range of waste loadings, to investigate the factors influencing the formation of molybdenum containing crystalline phases. X-ray diffraction and transmission electron microscopy showed that molybdates with a powellite type structure formed upon heat treatment of highly loaded glasses melted in air, and that these molybdates were capable of incorporating the majority of mono, di and trivalent cationic species present in the simulated HLW. The distribution of the cationic species on the A sites of the powellite type molybdate structures was shown to be random using extended x-ray absorption fine structure (EXAFS). Electron spin resonance and x-ray photoelectron spectroscopy were used to show that the oxidation state of the Mo in simplified simulated HLW glasses could be partially reduced by sparging the melt with a reducing (as opposed to a neutral or oxidising) gas. Heat treatments on these compositions showed that powellite molybdates were less likely to form in reduced melts, however sparging glasses containing a full simulated HLW with a reducing gas during melting increased the tendency for powellite type molybdate formation upon heat treatment. EXAFS was used to show that, regardless of the waste loading or sparge applied during melting, the Mo was predominantly present as (Mo04)2- tetrahedra in the glasses, and also in a yellow phase sample taken from a full scale simulated HLW glass.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2004

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Short, Rick

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.444469

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Short, Rick. Incorporation of molybdenum in nuclear waste glasses.. doctoral thesis, University of Sheffield, 2004.