Back to search

University of Sheffield

Validation of computational fluid-structure interaction models by comparison with collapsible tube experiments.

Abstract

dc:description.abstract

The objective of this thesis was to assess the validity of the fluid-structure interaction (FSI) facilities in LS-DYNA for the analysis of highly deformable structures interacting with flowing viscous fluids. The collapsible tube experiment was chosen as a validation tool for FSI since its three-dimensional computational modelling would have been impossible if the viscous internal fluid flow were not considered. An explicit three-dimensional finite element model of a collapsible-tube was constructed and solved using LS-DYNA. The fully coupled model included internal fluid flow; external, inlet and outlet pressures; tube wall tension; pre-stressing; and contact. The finite element boundary conditions were taken as the recorded values of flow rate and pressure from a standard collapsible-tube experiment for both steady and unsteady flows. The predicted tube geometry in the steady LS-DYNA model showed good agreement with the experiment for operating points in the highly compliant region of the pressure-flow characteristic curve. The comparative position of the pinch at the outlet end differed by only 5.6% of the outlet diameter in the worst case. This analysis represents an advance on other published work in that previously no comparison with experiments have been drawn for FSI models involving high Reynolds number flowing viscous fluids interacting with highly deformable three dimensional structures. This analysis successfully made that comparison and the experimental and computational results have combined to form a more detailed picture of the collapsible-tube phenomenon by including detailed stress results of the tube walls and views of the internal fluid flow. The collapsible tube model exhibited uncertainty errors due to the use of a coarser than desirable mesh and a reduced fluid speed of sound. Although both these approximations caused significant error in the model both were necessary in order to achieve acceptable solution times. Because of these errors a thorough quantitative validation could not be achieved although LS-DYNA has been proven to be qualitatively accurate. Increases in computing speed are required before thorough quantitative validation of FSI can be achieved by comparison with the collapsible tube experiments.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2002

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Scroggs, Richard A.

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.369891

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Scroggs, Richard A.. Validation of computational fluid-structure interaction models by comparison with collapsible tube experiments.. doctoral thesis, University of Sheffield, 2002.