Back to search

University of Sheffield

Lead-free Ceramics for High Temperature Actuator Applications

Abstract

dc:description.abstract

In the quest of lead-free ceramics with stable electromechanical strains at higher temperatures, the ternary system 1-x-yBiFeO3-xREFeO3-yRE2/3TiO3 (RE = La, Nd) B(RE)FT and pseudo-binary solid solutions (1-x)K1/2Bi1/2TiO3-x(0.80BiFeO3- 0.15LaFeO3-0.05La2/3TiO3), KBT-BLFT, (1-x)K1/2Bi1/2TiO3-x(0.82BiFeO3-0.15NdFeO3-0.03Nd2/3TiO3, KBT-BNFT and (1-x)K0.4Na0.6NbO3- x(BiFeO3) KNN-BF, were studied. Unlike undoped BiFeO3, B(RE)FT, ceramics in the ternary series can sustain large electricfields up to 8 kV/mm but no ferroelectric/antiferroelectric switching is observed indicating that the coercive fields are very high and therefore these ceramics are not likely to be used for actuator applications. The pseudo-binary solid solutions KBT-BLFT and KBT-BNFT offer opportunities of fabricating ceramics ranging from conventional ferroelectrics to pure electrostrictors. With increase in BLFT/BNFT concentrations, ferroelectric order is disrupted and relaxorlike behaviour is promoted. Promotion of relaxor-like behaviour is accompanied by an increase in positive strain and decrease in hysteresis of these ceramics. Electromechanical strain up to 0.16 % at 6 kV/mm can be achieved. The optimum strains are predominantly electrostrictive and exhibit fatigue resistant behaviour. More importantly the optimised electromechanical strains are stable up to a temperature of 300 °C making them superior to PZT-based ceramics in terms of temperature stability. The ceramics can be fabricated into a multilayer structure by tape casting technique as demonstrated by a prototype multilayer actuator. The binary solid solution KNN-BF is very limited and dense ceramics could not be fabricated with x > 0.01. Within the limited range studied, ceramics yield a strain of 0.05 % (2kV/mm) but the operating window is strongly hampered by the ferroelectric to ferroelectric phase transition which is close to ~100 °C. With Li doping the strain values could be enhanced to 0.12 % (3 kV/mm), however the room temperature phase is strongly polymorphic in nature and a monotonic decay in properties is observed with increase in temperature making these ceramics unsuitable for high temperature applications.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Khesro, Amir
Advisors dc:contributor.advisor
  • Reaney, Ian M
  • Sinclair, Derek C

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.702650

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Khesro, Amir. Lead-free Ceramics for High Temperature Actuator Applications. doctoral thesis, University of Sheffield, 2016.