Back to search

University of Sheffield

Modifications to blade tips in abradable contacts

Abstract

dc:description.abstract

In aero engines a thermally sprayed abradable material is applied to the inside of the casing in order to provide a seal around the blade tips of the compressor blades. During running and handling the blades cut a channel into the abradable material. This rub is poorly understood and often results in blade wear and poor sealing particularly in the later stages of the compressor. This thesis aims to investigate and characterise these rubs and provide recommendations for changes to the running and handling procedure, the abradable or the blade tip that will improve sealing and reduce blade wear. The AlSi polyester vs Ti(6Al 4V) and NiCrAl bentonite vs Inconel 718 rubs have been investigated through high speed rub testing. The effect of incursion rate, blade speed and abradable hardness have been investigated. Wear mechanisms have been proposed and clarified by further high speed wear testing and microstructure modelling. In addition several possible tip modifications have been tested and a successful modification has been extensively characterised. The wear mechanism was found to depend on the materials and the incursion rate while the abradable batch and, in the case of the NiCrAl bentonite abradable, the blade speed affected the severity of the mechanism. The AlSi based abradable cut at high incursion rates but wore by adhesion on to the blade an abrasion at low incursion rates. The NiCrAl bentonite abradable wore by local compaction and subsurface damage. At low incursion rate material was removed fast enough to accommodate the incursion but at higher incursion rates blade wear and compaction of the abradable were observed.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Watson, Michael
Advisors dc:contributor.advisor
  • Marshall, Matthew
  • Dwyer-Joyce, Rob

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.727272

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Watson, Michael. Modifications to blade tips in abradable contacts. doctoral thesis, University of Sheffield, 2017.