Back to search

University of Leeds

Computational and Experimental Study of Two Phase Flow in Pressure Swirl Atomizer

Abstract

dc:description.abstract

Atomizers are used in many engineering applications including spray combustion in furnaces, diesel engines, direct injection petrol engines and gas turbine engines. They are also commonly used in applying agricultural chemicals to crops, paint spraying, food processing and cooling of nuclear cores. Pressure swirl atomizers occupy a special position amongst other atomizers because they differ in quality of atomization, simplicity of construction, reliability and low pumping power requirements. Turbulent mixing of the liquid and gas in these atomizers is indispensable consideration in the process of atomization. This thesis presents a recent Eulerian modelling of two-phase flow in a pressure swirl atomizer using Computational Fluid Dynamics (CFD) STAR-CD code and assesses its capabilities and validation. In this novel Ʃ-Y_liq atomisation model, an Eulerian description is applied to solve the two-phase flow assuming both liquid and gas phases as a single continuum with high-density variation at large Reynolds and Weber numbers. The transport equations for the liquid mass fraction and interfacial surface density as well as the average density of the liquid and gas phases are modelled, liquid dispersion correctly captured and their numerical results presented. The results also show atomization characteristics such as droplet velocity and predicted droplet Sauter Mean Diameter (SMD) with reasonable order-of-magnitudes. The predictions show good agreement with experimental results obtained from a laser-diffraction-based drop size analyser (Malvern Spraytec). Different RANS turbulence models are evaluated in order to achieve the best configuration in comparison with experimental measurements and the standard k-ε turbulence model has shown the best performance. Parametric studies were conducted to analyse the influence of the liquid viscosity, surface tension, liquid and gas velocities, liquid and gas densities and pressure on the spray droplet SMD at different locations on the spray centre line and radial distances from the symmetry line of the atomizer. A combination of CFD modeling and the statistical Design of Experiments (DoE) technique known as modified Latin Hypercube Designs (LHD) is applied in order to improve SMD predictions from Ʃ-Y_liq atomisation model. With 4-factor DoE, eighty-seven (87) cases were simulated with the variations and combinations in the design variables such as liquid viscosity 0.31 to 200 mPa.s, surface tension 20 to 75 mN/m, nozzle exit orifice diameter 1.5 to 3.5 mm and liquid velocity from 1 to 6 m/s. The results for the SMD at the axial distances along the spray centreline were obtained. Combinatorial optimization was performed to identify and obtain the optimal nozzle exit orifice diameters, operating conditions and fluid properties that give the most minimum droplet SMD at the spray centreline. The results show remarkable improvement on SMD and new SMD correlation for the model.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Leeds
Year dc:date.issued
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Amedorme, Sherry Kwabla
Advisors dc:contributor.advisor
  • Kapur, Nikil
  • Lawes, Malcolm
  • Ruprecht, Daniel
  • Thompson, Harvey

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.755141
Dc Identifier Grantnumber
Development of Skills for Industry Project (DSIP)
Competency Based Training (CBT)

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Amedorme, Sherry Kwabla. Computational and Experimental Study of Two Phase Flow in Pressure Swirl Atomizer. doctoral thesis, University of Leeds, 2018.