Back to search

University of Sheffield

High-speed single-phase permanent magnet brushless DC motor.

Abstract

dc:description.abstract

Due to high efficiency, high power density and low cost, single-phase permanent magnet brushless DC motor has increasingly been used in industrial and domestic applications. This thesis focuses on the design and analysis of high-speed, single-phase, conventional and flux-switching permanent magnet brush less DC motors. This thesis presents a comparative study of conventional three-phase and single-phase permanent magnet brush less DC motors, which operate at 45,OOOrpm with I.lkW output power for the pump application, in terms of their machine design, drive system and electromagnetic performance. It is found that the single-phase permanent magnet brush less DC motor has a relatively lower drive system cost without significantly compromising the electromagnetic performance. Further, significant rotor eddy current loss exists in both motors. Hence, the analytical models are developed to predict the rotor eddy current loss which is resulted from the armature reaction field. By comparing with the 2D finite element method (FEM) predicted results, good agreement is obtained over the full speed range if the eddy current reaction field is taken into account. FEM is further employed to investigate open-circuit, armature and on-load rotor eddy current losses of the permanent magnet brushless DC motors. Particular emphasis is placed on the single-phase motor having an eccentric airgap with consideration for degree of airgap eccentricity, excitation current waveform, magnet segmentation, thickness and electrical conductivity of the retaining sleeve. The single-phase flux switching permanent magnet motor, which operates at 100,000rpm with 1.2kW output power for the automotive electrical turbo-charger application, is also investigated. Its operational principle is introduced and winding topologies are investigated. In addition, the chamfered rotor pole is optimised to improve the starting capability. In order to investigate the influence of significant end leakage-flux, a 3D lumped circuit magnetic model is developed to predict the back-EMF and the inductance and validated through experiment. This model is also employed to optimise the rotor pole width for increasing the motor power density and to investigate the relationship between the magnet dimensions and the motor end effect. Finally, the dynamic simulation models are developed to predict the dynamic electromagnetic performance and experimentally validated for a three-phase and a single-phase permanent magnet brush less DC motor, and a single-phase flux switching permanent magnet motor.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chen, Yu

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.719808

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Chen, Yu. High-speed single-phase permanent magnet brushless DC motor.. doctoral thesis, University of Sheffield, 2010.