Back to search

University of Leeds

Impact of faults on fluid flow in carbonates

Abstract

dc:description.abstract

To fully characterise the behaviour of carbonate rocks in the subsurface it is important to understand their textural heterogeneity, and how their textures may be modified by faulting. A number of fault zones were investigated in detail, firstly analysing the microstructural, petrophysical as well as mechanical properties of the host rocks. Secondly, describing the fault zone architectures by mapping fault rock distributions and fracture patterns. Lastly, correlating the deformation mechanisms forming the faults to the initial rock properties and the stress conditions during faulting. Moreover, triaxial laboratory deformation was performed on a large number of host rock samples covering all carbonate rock types, as well as the whole range of porosities (<1-52%). Deformation mechanisms that resulted in sample’s failure were studied in order to compare them with the naturally-occurring deformation. Moreover, permeability changes were investigated induced both by natural faulting and laboratory deformation. The results proved to be comparable, and showed that simplified rules may be derived in terms of predicting hydraulic properties of deformed carbonates. For instance, permeability generally seems to decrease due to deformation for carbonates with porosity >10%, and may be either increased or decreased for lower porosity samples. Higher porosity (>10%) carbonates fail due to distributed or localized cataclastic flow or focused damage around the macropores, resulting in porosity reduction. Lower porosity (<10%) carbonates fail in a brittle manner due to brecciation and transitional- or brittle-shearing, leading to porosity increase. Significant reduction in permeability, however, may only be produced by diagenetic processes, such as recrystallization and cementation, or very high-strains, which are able to create vi fine-grained cataclasites. However, even though these fault rocks gain very low permeability, they become prone to brittle deformation. Therefore, these potentially sealing fault rocks may be cut by open fractures if were subjected to further faulting or uplift, and hence, while creating permeability anisotropy in the reservoir, they may not form good seals. Nevertheless, several fault examples in this study showed fracture blunting at the surface of the fault rocks suggesting that fault sealing is possible both in highly-porous and very tight carbonates.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Leeds
Year dc:date.issued
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kaminskaite, Ieva
Advisors dc:contributor.advisor
  • Fisher, Q.J.
  • Grattoni, C.

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.797966

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Kaminskaite, Ieva. Impact of faults on fluid flow in carbonates. doctoral thesis, University of Leeds, 2019.