Back to search

University of Sheffield

Additive Manufacturing of Tungsten via Selective Laser Melting and Electron Beam Melting

Abstract

dc:description.abstract

This thesis explores powder bed Additive Layer Manufacturing (ALM) of pure tungsten. Two ALM processes were investigated; Selective Laser Melting (SLM) and Electron Beam Melting (EBM). An optimal experimental design approach was adopted to investigate the effect of process parameters on parts produced. Analysis of the SLM process was carried out using a Response Surface Methodology (RSM). The beam power in SLM significantly effected porosity; a laser power of at least 400 Watts was required to produce near dense parts (0.23% porosity). A valid response model could not be fitted to the SLM experimental data. Cracks propagated throughout SLM components as the porosity was reduced. This was attributed to stress imparted during processing and an operating temperature below the Ductile to Brittle Transition Temperature (DBTT). An Arcam EBM system was modified in order to reduce the build volume, allowing small volume materials development. A RSM was adopted to model the effects of EBM process parameters on defects within parts. Specifically, hatch spacing, beam current, and beam speed were investigated and shown to all have a significant effect on porosity and geometric accuracy. Second order models were generated to fit the experiential data, representing the response well (R^2 = 99% and R^2 = 93%) a minimum porosity of 0.04% was achieved. The properties of EBM tungsten were characterised; three point bending and Weibull analysis was used to determine characteristic strength (340MPa). Hardness and modulus was measured via nanoidentation was found to vary as a function of the position within samples. This was attributed to residual stress imparted during processing. EBSD revealed a strong [111]texture. This was attributed to the angle of thermal gradients in the melt pool.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wright, Jonathan
Advisors dc:contributor.advisor
  • Todd, Iain
  • Goodall, Russell

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.800558

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Wright, Jonathan. Additive Manufacturing of Tungsten via Selective Laser Melting and Electron Beam Melting. doctoral thesis, University of Sheffield, 2019.