Back to search

University of Sheffield

Microstructure and Modelling of Shear Forming

Abstract

dc:description.abstract

The advent of multiaxial CNC machines has generated renewed interest in flexible incremental forming manufacturing methodologies, such as shear forming. These processes use rotating tools in constant local contact with the workpiece, which is often also rotating, to generate shape. As a consequence, much lower loads than conventional forming are needed to produce components with no need for expensive special tooling. Potential has already been established by demonstrating manufacture of high-value products, e.g. turbine and satellite parts, with high dimensional accuracy from difficult to manufacture materials. Thus, huge opportunities exist for these processes to replace the current method of manufacture for a range of high value components, e.g. eliminating lengthy machining, reducing material waste and process times; or the manufacture of a complicated shape without the development of expensive tooling. However, little is known about the exact deformation conditions during processing and why certain materials are better than others for shear forming, leading to significant trial and error before production. Three alloys were used for this project: Timetal 54M, Jethete M154 and Inconel 718. General microscopy and Electron Backscatter Diffraction were used to measure strains and orientation maps during shear forming and compared with finite element simulations of the process. It was found that in all cases simple shear deformation was dominate but its extent varied through the thickness, with greater levels of deformation at the roller side. A Design of Experiments analysis was also conducted in order to understand the impact of process parameters in the properties of the final workpieces. Such information was the key to develop a reliable Finite Element Model (FEM) that closely resembles the deformation paths of this process. Three methods of damage calculations were embedded in the finite element model and it was found that the forming limit diagram approach had most potential to identify ultimate failure in shear forming, however its use was still not entirely adequate for this process and a different approach was suggested based on previous works found in the literature. Finally, a methodology to test the potential of materials to be shear spun is proposed based on the finite element model developed and these findings.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Vazquez Valdez, Karla Daniela
Advisors dc:contributor.advisor
  • Bradley, Wynne
  • Martin, Jackson

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.805398

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Vazquez Valdez, Karla Daniela. Microstructure and Modelling of Shear Forming. doctoral thesis, University of Sheffield, 2019.