Back to search

University of York

Heat Assisted Magnetic Recording using Exchange Bias

Abstract

dc:description.abstract

In this work a study of a new paradigm for the recording layer in a heat assisted magnetic recording (HAMR) media based on the use of exchange bias is presented. Exchange bias occurs when an antiferromagnetic (AF) layer such as IrMn is grown in contact with a ferromagnetic (FM) layer, which in our case happens to be also the recording layer resulting in a hysteresis loop shifted along the field axis. The FM layer when magnetised, serves to align the AF layer in the direction required to store the information and then provides a readout signal indicating in which direction the AF layer is oriented. Hence in a complex way the “recording layer” is actually part of the read/write head. By achieving spin alignment of the IrMn such that the spins are aligned perpendicular to the plane of the film, the required perpendicular exchange bias can be induced for information storage in the AF layer. A series of 14 set ofsamples have been prepared and evaluated to determine the optimised structure. A segregated CoCrPt-SiO2 sample was used as the recording layer from a pressed powder target in a HiTUS deposition system. Several seed layers were tested such as Ru, Pt and Cu for their ability to favour perpendicular anisotropy in double or combined form of 8 nm and 12 nm thicknesses respectively. They were deposited using 3 mTorr and 30 mTorr process pressure. XRD and XRR techniques were used in order to evaluate the structural properties of the multilayers. Alternating gradient force magnetometry and vibrating sample magnetometry at room and low temperature measurements were also used to characterise their magnetic response. The key feature of this media is that the recorded information is impossible to be erased by a demagnetising field. In order to achieve this requirement, the hysteresis loop has to be completely shifted to a negative field. In the current study a small shift up to Hex=325 Oe was achieved at 100K without the need of a Co interlayer. A complementary attempt was made to induce the desired exchange bias by depositing an ultrathin (0.8 nm) Co interlayer above a Pt and a Ru seed layer resulting in an exchange field of Hex=40 Oe. In addition, mixed seed layers were deposited using Ru/Pt and Ru/Cu with the first case showing the most promising results of squareness around 70% and coercivities of 1800 Oe. Because of the fact that loop shifts were observed at 100K, further work is required to optimise those structures.

Degree

thesis:*
Name dc:type.qualificationname
M.Sc by research
Level dc:type.qualificationlevel
masters
Grantor dc:publisher.institution
University of York
Year dc:date.issued
2020

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Manginas, Georgios
Advisor dc:contributor.advisor
  • Fernandez, Gonzalo Vallejo

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Manginas, Georgios. Heat Assisted Magnetic Recording using Exchange Bias. masters thesis, University of York, 2020.