Back to search

University of Leeds

The impact of polymeric flocculants on the sedimentation, flotation and dewatering of radwaste suspensions

Abstract

dc:description.abstract

The use of polymeric flocculants is receiving greater interest as a cheap, easily deployable and effective reagent to aggregate fine radwaste particulates, thus enhancing contaminant recovery in nuclear decommissioning. Particularly in the UK, where a significant volume of Mg(OH)2 based sludge has developed as part of the UK waste inventory in in situ environments. Removal and treatment of this radionuclide impregnated sludge is crucial for current decommissioning strategies. This sludge is a polydisperse distribution of particle sizes, from fuel fragments to colloidal Mg(OH)2. Current strategies are dominated by the use of gravity driven operations such as sedimentation and thickening, technologies which have low reliance on mechanical parts being impervious to failure, which are difficult and expensive to address in radioactive environments. Whilst coarser particle sizes settle with ease, the colloidal and fine material is more problematic to remove through sedimentation. Whilst it is known, and was shown in this work that polymeric flocculants can improve suspension residence times, the role of floc structure is not fully understood and was probed in depth in this thesis, where due to the lack of inter-aggregate spacing, larger flocs made from poly(acrylic acid)-co-polyacrylamide settling aids were most influential on sedimentation rates when scrutinised with fractal modified hindered settling models. As the decommissioning of facilities which hold the Mg(OH)2 sludge inventory is time critical due to degradation of the building structures, an alternative to the use of gravity driven sedimentation is dispersed air flotation. Flotation was investigated as a rapid alternative to remove suspended Mg(OH)2 material using traditional anionic surfactant collectors, sodium dodecyl sulphate and sodium lauroyl isethionate. In order to optimise the process, the optimum dose of hydrophobic surface modifier, known as a collector, was found to be determined to be a function of collector surface coverage. A common observation of surfactant collector driven flotation is that there is a hydrodynamically limited operational envelope for recoverable particle size distributions. Where fines lack the inertia to overcome the slip streams generated by rising bubbles and coarse particles have high bubble detachment energies. There was also significant water entrainment during flotation using surfactants. Polymeric flocculants were synthesised as block copolymers, poly(acrylic acid)-b-poly(n-butyl acrylate), to display amphiphilic properties. These amphiphilic block copolymers were deployed as dual flocculation-flotation aids to aggregate fines to possess the inertia for bubble attachment, whilst lacking the interfacial surface energy reduction to result in excess water entrainment. It was found that the relative hydrophobic chain length of these macrosurfactants was highly influential on flotation and flocculation performance, with greater collector efficiencies than traditional surfactants due to their superior water retention. The different approaches were compared by hypothesising five deployment strategies, including sedimentation without polymers, sedimentation with the optimum dosages for flocculation and sedimentation using both poly(acrylic acid)-co-polyacrylamide and poly(acrylic acid)-b-poly(n-butyl acrylate). Finally, sedimentation rates were compared pre and post-flotation using poly(acrylic acid)-b-poly(n-butyl acrylate). The consolidated bed post flotation was also compared for the 5 scenarios and additional considerations for selecting an optimum strategy were also discussed to inform on possible future work.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Leeds
Year dc:date.issued
2021

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lockwood, Alexander Peter Geoffrey
Advisors dc:contributor.advisor
  • Hunter, Timothy
  • Harbottle, David
  • Peakall, Jeffrey
  • Warren, Nicholas
  • Barnes, Martyn
ORCID person:identifier.orcid

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.837103
Dc Identifier Grantnumber
EP/L015390/1

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Lockwood, Alexander Peter Geoffrey. The impact of polymeric flocculants on the sedimentation, flotation and dewatering of radwaste suspensions. doctoral thesis, University of Leeds, 2021.