Back to search

University of Sheffield

Aerodynamic Analysis on Modified Horizontal-Axis-Wind-Turbine

Abstract

dc:description.abstract

The increasing of lift force is an important task during the design process of wind turbines. This leads to a higher performance of wind turbines. The performance of wind turbines can be increased via either active or passive flow controllers. The aim of this work is to apply a passive flow controller, namely riblets, on the blades of National Renewable Energy Laboratory (NREL) phase II. The thesis consists of two main bodies: smooth and tripped study cases. The smooth study cases begin with studies on 2D aerofoils to investigate fluid domain geometry and turbulence models’ effects on aerodynamic coefficients. A fixed blade is then simulated to determine the 2D aerodynamic forces and the pressure distribution for various angle of attacks (AOA). In addition, the torque of one-third scale rotor and full-scale rotor of the NREL phase II are computed separately. Unlike the previous work on riblets, the riblets size of current work is in order of boundary layer thickness. First, a validation for large-scale riblets on DU 96-W-180 is performed to compare the results. The tripped cases begin with applying a riblet (step) with h+ = 67-69 on 2D S809. However, the result is unsatisfactory due to missing 3D effect. Different riblet configurations are then applied on the suction side of a 3D blade. The maximum increase in lift and reduction in drag occur at l+ = 460 for alpha= 16. However, for a wider range of AOAs, l+ = 104-157 show an improved performance. The results show that riblets perform best at low Re and stall AOAs. Finally, riblets are placed on the blades’ suction side of the NREL phase II. The riblets with l+ = 114 -140 show an improvement in the performance, which varies between 1.32% and 0.51%, depending on tip speed ratio. This work confirms that the large-scale riblets are not only able to reduce drag, but also can increase lift, and therefore improve the performance of wind turbines. Unlike the small-scale riblets, the large-scale ones act as a vortex generator and cause a recirculated zone in the wake of large riblets, which leads to delaying stall to a further chord location of the blade. In addition, and similar to small-scale riblets, the viscous sub-layer thickness of current tripped cases is increased, thus causing an upward shift of the log-law region and a reduction of the turbulence statistics. The drag reduction and lift increase depend on AOAs. However, the riblets positively affect more the skin-friction force for a larger number of riblets at a wider range of AOAs. This means the contribution of riblets in increasing the area of the blade is negligible because of the small riblets size compared to the blade size.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Qansh, Hassan
Advisor dc:contributor.advisor
  • Nowakowski, Andrew
ORCID person:identifier.orcid

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.852185

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Qansh, Hassan. Aerodynamic Analysis on Modified Horizontal-Axis-Wind-Turbine. doctoral thesis, University of Sheffield, 2022.