Back to search

University of Sheffield

Characterisation and interaction of simulated high level, radioactive waste (HLW) with borosilicate glass

Abstract

dc:description.abstract

Alkali borosilicate glasses have been widely used as an immobilisation network for high level, radioactive waste for the past 50 years. Increasing the waste loading would increase the efficiency of the process, but also increase the tendency of the waste towards devitrification in final storage. Devitrification could have a negative effect on the long term properties of the glass. “Yellow phase” is often observed within devitrified glass, and consists of many of the low solubility elements of the waste stream composition (Mo, Sr, Te, Cr and S). Yellow phase may also incorporate some of the more radioactive fission products such as l37Cs and 90Sr. The increased corrosion of the Inconel 601 melters in the early stages of melting time presents a problem, as decreased melter life means increased process inefficiency. Simulated waste streams have undergone a range of heat treatments and it has been shown that elemental segregation of the calcine is inevitable. Scanning electron microscopy and transmission electron microscopy showed a characteristic segregation of the rare earths and actinide surrogates to a fluorite structured phase. Segregation of a yellow phase to the melt surface, containing loosely bonded and highly soluble (in aqueous solution) radionuclides was observed using X-ray powder diffraction. It was demonstrated that the calcination process currently in use is ineffective and the temperatures to which it currently operates are overestimated. Simulated (non-radioactive) glasses have been melted in Inconel 601 crucibles using a variety of atmospheres, a range of waste loadings and waste streams which have undergone preliminary heat treatment. Some basic mechanisms for the dissolution of the waste into the glass have been proposed. The formation of a rare-earth enriched solute layer around the waste particles was shown using SEM, occurring concurrently with nucleation of yellow phase and segregation to the melt surface. The yellow phase, once incorporated into the body of the melt via convective mixing was seen to nucleate around bubbles within the viscous matrix. Fluorite-structured phases did not dissolve readily in the glass and were found to contain many rare-earths and actinide simulants.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2005

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Morgan, Susan

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.853305

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Morgan, Susan. Characterisation and interaction of simulated high level, radioactive waste (HLW) with borosilicate glass. doctoral thesis, University of Sheffield, 2005.