Back to search

University of Leeds

A-Site Compensated Donor-Doped SrTiO3

Abstract

dc:description.abstract

The initial motivations of this thesis were to dope paraelectric SrTiO3 with niobium alongside an A-site vacancy compensation scheme so as to study the resulting chemical defects and potentially manipulate them in order to create a macroscopic dipole to induce a piezoelectric effect. However, it is made clear that this thesis is not an attempt at creating a new, nor modifying an existing, ferroelectric system. This thesis will cover an introduction to piezoelectric and ferroelectric materials, due to the author’s inclusion within a piezoelectric research group, from which stemmed the idea for this research. A literature review into the defect chemistry of SrTiO3 was carried out, including the effects of non-stoichiometric SrTiO3, acceptor and donor doping, followed by a review of existing defect dipole research. Samples of Sr1-x/2Ti1-xNbxO3, Sr0.9Ti1-xNbxO3, SrTi1-xNbxO3, SrTi1-xMnxO3 and SrTi1-xCoxO3 were produced via the mixed oxide solid state reaction technique. Samples were characterised using X-ray diffraction and scanning electron microscopy. Following this electrical characterisation was carried out and impedance, electric modulus and permittivity data were examined in order to better understand the defect mechanisms taking place. Complex impedance analysis was used as an initial comparison of conductivity before deeper analysis of the frequency dependence of impedance and modulus data was conducted. Detailed analysis of the impedance and modulus data showed that electronic conduction dominated the electrical behaviour of all Nb-doped SrTiO3 samples. The conductivity was much more electron-dominated in the B-site Nb-doped samples compared to the A-site vacancy samples. This resulted in a blue colouration of sample pellets, indicating the reduction of Ti4+ to Ti3+ and higher conductivities. The influence of Sr vacancies is also apparent from the lack of increase in conductivity in the Sr1-x/2 samples despite ten times the increase in Nb content. It was shown that the addition of large concentrations of A-site vacancies to the perovskite system enabled it structurally to accommodate large amounts of Nb, but it also significantly reduced the increase in conductivity seen by Nb doping. Equally, the large amount of Nb doping enabled the SrTiO3 system to accept large amounts of Sr deficiencies (up to 15%) by charge compensation. The vacancy/donor compensation scheme is shown to be key to maintaining the SrTiO3 perovskite structure by charge compensation, proven by the Sr0.9 sample set which began to eject TiO2 as a secondary phase as Nb dopant decreased.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Leeds
Year dc:date.issued
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Fisher, Chloe Jane
Advisor dc:contributor.advisor
  • Bell, Andrew

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.858742

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Fisher, Chloe Jane. A-Site Compensated Donor-Doped SrTiO3. doctoral thesis, University of Leeds, 2022.