Back to search

University of Sheffield

PISA Block Copolymers prepared via RAFT Polymerisation for use as Friction Modifiers

Abstract

dc:description.abstract

Friction modifiers are chemical additives for motor oils, they are used to reduce frictional losses within an engine in order to improve its efficiency. Poly(Stearylmethacrylate)- Poly(Benzylmethacrylate) (PSMA-PBzMA) nanoparticles were synthesised via a one-pot polymerisation-induced self assembly reaction using a RAFT control group and tested for use as friction modifiers. 11 different sized nanoparticles were synthesised with and without ethylene glycol dimethacrylate cross-linking. These were synthesised with good chain length control, as measured by GPC, and formed stable spherical nanoparticles with small variance in nanoparticle diameter, as measured by DLS, TEM and SAXS. These nanoparticles were tested in a variety of different tribological contacts in order to establish their effect on friction within a contact, these include across all sliding:rolling ratios as well as in a linear and reciprocating contact. These tests show that small nanoparticles (PSMA30PBzMA40 primarily tested) show reduced friction across all contact environments and speeds, with particularly large friction reduction in the boundary regime, with cross-linking of these nanoparticles appearing to improve their long term friction reduction. Larger nanoparticles (PSMA30PBzMA200 primarily tested) show larger friction reduction in the boundary lubrication regime in some contact environments, in particular the cross-linked equivalent. This effect though is not present across all types of contact, e.g. high sliding:rolling ratios. This shows that small cross-linked PSMA-PBzMA nanoparticles (23-30nm) can be effective friction modifiers in an internal combustion engine, while larger nanoparticles are likely only effective in niche environments. These nanoparticles also have no effect on wear of the contact or viscosity of the oil and were shown to be stable long term upon completion of tribological testing, indicating these nanoparticles can be effective long term friction modifiers with little effect on other tribological properties within an ICE. Mechanistic analysis of how these nanoparticles reduce friction within a contact was undertaken by analysing the film generation and nanocompression. These showed that these nanoparticles rapidly formed a stable tribofilm upon the contact, these nanoparticles are then easily compressed within a contact while being soft and easily sheared, resulting in a very low friction contact by preventing contact of the hard steel surfaces. Upon exiting the contact they then display an elastic property to rebound back to their original shape, allowing for long-term friction reduction. Testing of PDMAC-PDAAM water-soluble nanoparticles also displayed friction reduction in the boundary lubrication regime, indicating that this friction-reducing effect is common across a wide variety of polymerisation induced self assembled nanoparticles.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Pratt, Liam
Advisors dc:contributor.advisor
  • Dwyer-Joyce, Rob
  • Armes, Steven
ORCID person:identifier.orcid

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.858835

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Pratt, Liam. PISA Block Copolymers prepared via RAFT Polymerisation for use as Friction Modifiers. doctoral thesis, University of Sheffield, 2022.