Back to search

University of Sheffield

Oxide ion conductivity, Resistive-switching and Ferroelectricity of Doped-HfO2

Abstract

dc:description.abstract

Yttria-stabilised hafnia, Hf1-xYxO2-x/2 (x=0.15, 0.30 and 0.45), ceramics were prepared by solid state synthesis and characterised by ac impedance spectroscopy. Electrical conductivity of x=0.15 is one order of magnitude higher than x=0.30 and 0.45. All compositions are foremost oxide ion conductors but they contain a small p-type electronic conduction via increasing Y3+ concentration and pO2. YSH materials therefore are mixed conductors. P-type conductivity is attributed to created holes that is believed to be located on under-bonded oxide ions. A study on the effect of a small dc bias on YSH ceramics shows enhancement of their conductivity, transforming into a resistive switching behaviour. This behaviour is novel for any bulk ceramics other than Ca-doped BiFeO3. Switching of YSH depends on both oxygen partial pressure, pO2, and temperature. At low applied voltage, the increase in the conductivity is associated with p-type behaviour commenced at the positive electrode/ceramic interface, but with further applied voltage, YSH underwent a transition from p-type to n-type behaviour which is commenced at the negative electrode/ceramics interface. With increasing applied voltage, the total conductivity enhanced sharply by 1.5- 2.5 orders of magnitude that is reversible with hysteresis under removal of the applied voltage. The ac impedance results of Hf1-xZrxO2 thin films demonstrate a single homogeneous component attributed to the bulk layer. Resistance of all compositions decreased with increasing pO2 (N2-Air-O2). This decrease in resistance is associated with p-type electronic conduction. In p-type materials, a decrease in resistance is related to the increase in number of holes that can probably be located on under-bonded oxygen or created during the preparation of the thin films. The equivalent circuit of a resistor in parallel with a seriesconnected CPE-C element gave best fitting to HZO thin film samples. Results of fixed frequency variable temperature sweeps of permittivity, er, of HZO show a sharp peak at 464- 474 °C with a maximum permittivity of ~ 11100. This result is the first report of a peak in the permittivity of HZO thin films that is attributed to a transition from ferroelectric into paraelectric behaviour at Tc.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Alotaibi, Meshari
Advisor dc:contributor.advisor
  • West, Anthony R
ORCID person:identifier.orcid

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.875046

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Alotaibi, Meshari. Oxide ion conductivity, Resistive-switching and Ferroelectricity of Doped-HfO2. doctoral thesis, University of Sheffield, 2022.