Back to search

University of Sheffield

Modelling and control approaches for a continuous powder to tablet manufacturing process

Abstract

dc:description.abstract

The pharmaceutical industry is moving towards continuous manufacturing to improve efficiency, reduce waste and improve product quality. Tablets are the most common form of pharmaceutical products and is therefore important to understand their continuous manufacturing. A Consigma-25 powder to tablet line via wet granulation was used as is a good example of a continuous production line. The impact of the granulation parameters such as the L/S ratio and filling times on the behaviour of the granules throughout the drying process was investigated. The water mass was found to be the only driver of the drying time required to reach a specific moisture content when the drying conditions were kept constant. The impact of both the granule moisture content after drying and L/S ratio on the granule compression properties and final tablet properties was investigated. The compactability of the granules remained unchanged while the compressibility was affected by both variables. Both an increase in L/S ratio and moisture content lead to denser and stronger tablets. The dissolution time of the tablets was found to be a function of the tablet porosity with the value increasing exponentially as the porosity got closer to 0. The data obtained was used to fit flowsheet models for both the drying and compaction processes. The models performed well and were used to develop, tune and test different control methods. A feed forward control loop that maintained the output granule moisture content after the dryer by varying the drying time performed well when tested with random liquid flow variability. Feedback, feed forward and model predictive controllers to control the tablet properties were developed and tested. The controllers worked well showcasing the importance of control during continuous manufacturing and the advantages of models during the development process.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Monaco, Daniele
Advisors dc:contributor.advisor
  • Salman, Agba
  • James, Litster
ORCID person:identifier.orcid

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Monaco, Daniele. Modelling and control approaches for a continuous powder to tablet manufacturing process. doctoral thesis, University of Sheffield, 2022.