Back to search

University of Sheffield

Microstructural control in Inconel 718 manufactured by laser powder bed fusion

Abstract

dc:description.abstract

Additive Manufacturing promises intricate and high performance parts to be manufactured with less waste. However, more research is required into defect and temperature control in complex geometries, as well as on the production of functionally graded parts. This thesis covers the initial concepts of a new method of achieving a homogeneous temperature distribution in a complex part by cutting laser hatch lines in to mini hatches and allowing a different set of laser parameters to be assigned to each hatch. This method should also allow for the generation of parts with consistent quality that contain microstructurally and mechanically distinct regions. Further to this, a new method of achieving alternate microstructures using the additive manufacturing process has been investigated in Inconel 718. Traditional additive manufacturing produces a microstructure that comprises of long columnar grains. This new method exploits lack of fusion and keyhole defects as well as unmelted powder present in the central region of a printed component in order to generate a wide range of microstructures after hot isostatic pressing. As well as enabling a variation in tensile properties to be achieved in a multi-microstructural part, this method has been shown to be able to produce components using a fraction of the time and energy required in a standard additive manufacturing build. These findings have implications for the broader field of additive manufacturing, with increased consistency providing a route for simpler part qualification in safety critical industries, and microstructural control providing a higher level of material functionality in complex parts.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Livera, Elaine
Advisors dc:contributor.advisor
  • Todd, Iain
  • Christofidou, Katerina
ORCID person:identifier.orcid

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Livera, Elaine. Microstructural control in Inconel 718 manufactured by laser powder bed fusion. doctoral thesis, University of Sheffield, 2023.