Back to search

University of Sheffield

Winding loss optimisation for high power density permanent magnet machines for aerospace propulsion

Abstract

dc:description.abstract

This thesis reports on an investigation into the winding losses of high power density brushless permanent magnet machines. The research is performed in the context of a design study for a 350kW, 6000rpm machine for aerospace propulsion with an emphasis on methods for increasing the electric loading that can be sustained in the stator. A particular focus of the research is the use of solid bar conductors although this type of conductor tends to give high level of AC losses if not properly designed. A design study is undertaken to establish a machine design capable of meeting the 350kW specification which includes initial sizing and sensitivity studies on various design features and dimensions. This yields a design based on a large cross-section solid bar winding, which on the basis of quasi-static considerations, was capable of meeting the specification. However, consideration of AC losses in the stator winding caused by induced eddy currents result in almost an order of magnitude increase in conductor loss which would be unsustainable in practice. A series of strategies to reduce AC loss were investigated specifically the re-positioning of conductors, magnetic slot-wedges, paralleling and transposition, consideration of aluminium and hybrid copper / aluminium windings and the optimisation of core geometry to alleviate flux in the stator slot. The optimum combination of these strategies result in a near 7-fold reduction in the conductor loss, making a solid bar winding competitive with a traditional wound machine in terms of loss while retaining the heat-transfer advantages. The role of Litz wire as an alternative conductor is investigated in detail, including a comparison in both two- and three-dimensions of various methods for calculating eddy current losses in Litz. Machine level simulations of the reference design equipped with Litz wire are reported and comparison drawn with bar conductors. The thesis culminates with a series of experimental measurements on a motorette for both strip wound bar conductor and Litz wire, which provide a level of validation for the simulations and highlight the challenges of measuring AC loss in Litz winding in representative stator cores.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sun, Yangyu
Advisor dc:contributor.advisor
  • Jewell, Geraint

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Sun, Yangyu. Winding loss optimisation for high power density permanent magnet machines for aerospace propulsion. doctoral thesis, University of Sheffield, 2024.