Back to search

University of Leeds

High-temperature dielectric ceramics of the tetragonal tungsten-bronze structure and the role of aerosol deposition in modulating permittivity-temperature relationships

Abstract

dc:description.abstract

This work explores the development of high temperature dielectrics based on an unfilled tungsten bronze-structured ceramic, Ca0.28Ba0.72Nb2O6 (CBN28), for potential power electronics applications. CBN28 exhibited ferroelectric P-E loops, a slightly diffuse permittivity peak around TC at 231 °C, and high losses above 250 °C due to ionic conductivity (tan δ > 0.2). Subsequent A site substitution of Y3+ for Ca2+/Ba2+ with assumed vacancy addition, in the nominal composition (Ca0.28Ba0.72)1–3w/2YwNb2O6 [0 ≤ w ≤ 0.20], increased permittivity-temperature stability at the single-phase limit, w = 0.04 (ɛr = 1143 ±15 % from 71 to 210 ⁰C), and narrowed P-E loops (Pr at 40 kV cm-1 = 1.5 µC cm-2, whereas in CBN28 Pr = 2.4 µC cm-2). Doping with Y3+ and Ta5+, in the nominal composition (Ca0.28Ba0.72)0.94Y0.04Nb1.8Ta0.2O6, induced permittivity-frequency dependence, lowered the temperature of ɛr-Max (TM) to 13 °C at 1 kHz and 46 °C at 1000 kHz, further improved temperature stability of permittivity (ɛr = 954 ±15 % from -58 to 110 ⁰C) and substantially narrowed P-E loops (Pr at 40 kV cm-1 = ~0.5 µC cm-2). Decreasing Ca content, in the formulation (Ca0.22Ba0.78)0.94Y0.04Nb1.8Ta0.2O6, produced ɛr = 972 ±15 % from -9 to 166 ⁰C and removed a secondary phase. To develop low-temperature deposition of strained ceramic films, a particle aerosol deposition (PAD) system was commissioned at Leeds. This produced submicron Al2O3 and CBN28 anchor layer films with evidence of severe ceramic deformation in the layers by electron microscopy. Subsequent PAD (on a system in Manchester) of a calcined, high-energy milled and granulated CBN28 powder produced a thick film (10+ µm) with highly supressed polarisation responses (PMax at 40 kV cm-1 = ~0.3 µC cm-2, εr = ~85). Annealing, up to 750 °C, partially recovered permittivity, retained improved temperature stability, and induced relaxor-like frequency dependence (εr = ~225 ±15 % from ~20 to ~240 °C). XRD peak broadening analysis of the CBN film pre- and post- annealing at 750 °C suggested microstrain reduction from 0.14 to 0.11 % strain in combination with crystallite size increases from ~125 to ~270 nm.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Leeds
Year dc:date.issued
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Peirson, Harry John
Advisors dc:contributor.advisor
  • Brown, Andy
  • Milne, Steven
ORCID person:identifier.orcid

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Dc Identifier Grantnumber
EP/S029036/1
EP/V053361/1

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Peirson, Harry John. High-temperature dielectric ceramics of the tetragonal tungsten-bronze structure and the role of aerosol deposition in modulating permittivity-temperature relationships. doctoral thesis, University of Leeds, 2024.