Back to search

University of Sheffield

Investigation of Manufacturing Tolerances on Cogging Torque and Torque Ripple in Permanent Magnet Synchronous Machines

Abstract

dc:description.abstract

This thesis investigates the influence of manufacturing tolerances on cogging torque and torque ripple in permanent magnet (PM) synchronous machines by phasor analysis, Taguchi method, and finite element method (FEM). The investigated manufacturing tolerances include PM tolerances, rotor eccentricities, tooth bulges, and additional air gaps for single-type tolerances, and interaction effects of PM tolerances or tooth bulges and rotor static/dynamic eccentricities for multiple-type tolerances. All the obtained results are validated by the 2-dimensional FEM and experiments on the prototypes. First, the worst-case scenario of single-type tolerances in multiple PMs or teeth with the highest cogging torque is identified by using the Taguchi method and/or phasor analysis, considering PM tolerances, rotor eccentricities, tooth bulges, and additional air gaps. Compared to the tolerance in one PM or tooth, the cogging torque resulted from the tolerances in different PMs/teeth is much more complex and serious. Second, the interaction effects of multiple-type tolerances, including PM tolerances or tooth bulges and rotor static and dynamic eccentricities, on cogging torque are investigated. Both weakening and strengthening effects are revealed, depending on the relative locations of multiple-type tolerances. By detecting these relative locations during manufacturing process, it is possible to mitigate the worst scenario and minimise the influence of manufacturing tolerances. Third, the influence of slot and pole number combinations on cogging torque is studied in PM machines with multiple-type tolerances, i.e., tooth bulges and rotor static/dynamic eccentricities. Finally, a robust design strategy based on the Taguchi method is proposed to reduce the torque ripple caused by the real distribution of additional air gaps in mass production. It shows that the asymmetric circumferential positions of teeth can significantly reduce the torque ripple in mass production.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Xiang, Dong
Advisor dc:contributor.advisor
  • Zhu, Zi-Qiang
ORCID person:identifier.orcid

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Xiang, Dong. Investigation of Manufacturing Tolerances on Cogging Torque and Torque Ripple in Permanent Magnet Synchronous Machines. doctoral thesis, University of Sheffield, 2024.