Back to search

University of Sheffield

Rough Surface Contacts, Third-Body Layers and the Wheel-Rail Interface

Abstract

dc:description.abstract

Understanding and managing adhesion at the wheel-rail interface is paramount to the safe running of a railway. Anything that increases or decreases the level of traction/adhesion is therefore of interest to the industry. Various third-body layers (3BLs) contribute to the levels of traction, be it leaves in autumn or lubricants ap- plied at curves. Surface roughness is known to affect friction, however it is poorly understood when paired with 3BLs. High surface roughness occurs on wheels and rails following rail grinding and wheel turning procedures. How this surface rough- ness evolves after these reprofiling procedures is not yet known. The aim of this thesis is to better understand surface roughness at the wheel-rail interface with and without 3BLs present. To do this the high pressure torsion (HPT) rig was employed to simulate the the tribology at the wheel-rail interface. Surface roughness was applied to the HPT specimens and measured using surface roughness replicas and an Alicona microscope. Water, grease and leaves were applied to the interface to better understand what effect these 3BLs would have on the traction. In addition to this, the HPT specimens were instrumented with ultrasonic sensors which would measure the interfacial stiffness in-situ during a test. Following this the extended creep-force (ECF) model was parameterised with the outputs from the HPT tests to predict full-scale outcomes when surfaces are both rough and contaminated with 3BLs. These predictions were then validated using the full-scale wheel-rail rig at the University of Sheffeld. A link between surface roughness and the traction coecient when running-in was found for dry contacts. Post grinding roughness levels were found to reduce down to near run-in after just a few equivalent train passes. High levels of roughness reduced the impact of friction lowering 3BLs. Leaf layers slowed the rate at which roughness decreases. The ECF model parameterisation was successful and good agreement was found between the ECF and the HPT results. The ECF was able to predict full-scale outcomes with a fair degree of accuracy especially for the dry, water and leaf cases. A link was found between interfacial stiffness and surface roughness for dry contacts, meaning that surface roughness may be remotely measurable in real- time using ultrasonics. The ultrasonic sensors were also able to detect the presence of 3BLs, but not the distinguish the type of 3BL.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Shackleton, Harry
Advisor dc:contributor.advisor
  • Roger, Lewis

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Shackleton, Harry. Rough Surface Contacts, Third-Body Layers and the Wheel-Rail Interface. doctoral thesis, University of Sheffield, 2024.