Back to search

University of Sheffield

USE OF CEMENT BYPASS DUST AS A SUSTAINABLE CEMENT REPLACEMENT

Abstract

dc:description.abstract

Cement bypass dust (CBPD) is a waste dust extracted from rotary cement kilns at around 2% of cement clinker by weight. CBPD is often landfilled due to its excessive contents of chlorides, sulphates, and high alkalinity, at high monetary and environmental cost. Due to its high pH and lime content, it is hypothesized that CBPD could be used as a cement replacement with activating potential to make a sustainable binder. The aim of this research is to create a sustainable binder composed of CBPD and pozzolanic materials that can perform similarly to OPC. This was achieved through extensive lab work, including a thorough microstructural analysis to properly characterise the behaviour of binders. Preliminary investigations showed that ambient temperature cured binders composed of CBPD and granulated ground blast furnace slag (GBFS) at ratios of 1:1 are possible. Heat curing proved to worsen the long-term strength benefits of CBPD binders, leading to lesser hydration products and a more porous microstructure. This is primarily due to accelerated hydration leading to uneven reaction products and consequently a less dense microstructure. Results also indicated that the inclusion of 20% cement content enhanced properties such as strength and workability. Further research investigated the differences between CBPDs sourced from different locations. It was found that CBPDs with high free lime contents lead to deleterious expansion causing poor mechanical properties. It was also identified that the strength of CBPDs largely comes from its ettringite content. Following this, research involving carbonation curing revealed that the free lime content of CBPDs can be exploited due to the reaction of lime and CO2. Thus, the properties of the lime rich CBPD binders were significantly enhanced relative to the sulphate rich CBPD. This showed that different forms of curing may be more suitable for different types of CBPD. A milled CBPD mix composed of 10% metakaolin, 45% CBPD and 45% GBFS showed optimum mechanical and durability properties outperforming the control cement mix. CBPD mixes generally outperformed OPC when tested for alkali-silica reaction. Chlorides from CBPD binders did not cause any significant corrosion to steel fibres. Life cycle analysis indicates that all the studied binders had significantly less global warming potential than OPC. This work shows that a cementless, environmentally friendly binder that can perform similarly to OPC is possible with CBPD. This can lead to reductions in landfilling and to make cement manufacture overall more efficient and less polluting.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kobeiter Abiad, Ahmad Mahmoud
Advisors dc:contributor.advisor
  • Pilakoutas, Kypros
  • Guadagnini, Maurizio
  • Kinoshita, Hajime

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Dc Identifier Grantnumber
199558359

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Kobeiter Abiad, Ahmad Mahmoud. USE OF CEMENT BYPASS DUST AS A SUSTAINABLE CEMENT REPLACEMENT. doctoral thesis, University of Sheffield, 2024.