Back to search

University of Sheffield

The use of Dynamic Laser Assisted Heating (DLAH) for microstructural customisation of Ti6Al4V processed using Diode Point Melting (DPM)

Abstract

dc:description.abstract

Additive manufacturing has revolutionised the production of complex, high-performance components, with Laser Powder Bed Fusion (LPBF) and Electron Beam Melting (EBM) leading the way. These technologies enable precise layer-by-layer fabrication using metallic powders, offering reduced material waste and unprecedented design freedom. Despite these advantages, challenges such as microstructural heterogeneity, residual stresses, and defects persist, particularly in Ti6Al4V alloy components. LPBF often induces martensitic microstructures due to rapid cooling rates, compromising ductility, while EBM, although better at reducing residual stresses, struggles with achieving fine microstructural control. Diode Point Melting (DPM) represents a novel approach in additive manufacturing, utilising eight pieces of 5.5W (the maximum power can be taken from single 450 nm emitter) diode lasers focusing on a single focal point, offering a more affordable and accessible alternative to conventional. This method offers significant advantages over traditional Laser Powder Bed Fusion (LPBF) systems, including improved energy efficiency, reduced equipment costs, and enhanced scalability. By integrating DPM with targeted laser heating, this work seeks to address key challenges in AM, such as thermal gradients and microstructural customisation. This research also investigates the innovative integration of Dynamic Laser Assisted Heating (DLAH), and Diode Point Melting (DPM) to overcome these challenges. The hybrid system synergises preheating strategies with precision melting, addressing critical limitations of LPBF and EBM. Comprehensive experimental studies were conducted to optimise laser parameters and preheating conditions, while advanced characterisation techniques, including electron backscatter diffraction (EBSD) and X-ray diffraction (XRD), were employed to analyse microstructural and mechanical outcomes. The findings demonstrate that combining DLAH with DPM significantly alters the mechanical properties of Ti6Al4V components by refining microstructures, reducing defects, and mitigating the formation of martensite. This dual-laser approach promotes uniform thermal gradients, ensuring superior layer bonding and improved dimensional accuracy. The results also highlight the potential for scalability and industrial adoption, making this method a promising advancement in the field of additive manufacturing.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Sheffield
Year dc:date.issued
2025

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Aydin, Alkim
Advisor dc:contributor.advisor
  • Mumtaz, Kamran
ORCID person:identifier.orcid

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Dc Identifier Grantnumber
Law No. 1416
EP/W024764/1

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Aydin, Alkim. The use of Dynamic Laser Assisted Heating (DLAH) for microstructural customisation of Ti6Al4V processed using Diode Point Melting (DPM). doctoral thesis, University of Sheffield, 2025.