Back to search

University of Leeds

The lubrication of normal human ankle joints

Abstract

dc:description.abstract

The geometry, friction and lubrication of normal human ankle joints have been investigated. The joints exhibited converging diverging surfaces in the direction of motion. The cylindrical form of the measured surface contours indicated that a reduced radius of about 0.35 m gave a good representation of the ankle joint geometry. Human ankle joint specimens were tested in a joint simulator. Although considerable difficulties were encountered in the measurement of the very small coefficient of friction between the cartilage surfaces, an upper limit of about 0.01 was identified for this important tribological feature of synovial joints. An equivalent bearing to represent the ankle joint was proposed which consisted of a rigid cylinder covered with a compliant layer sliding on a rigid plane. The dimensions for this geometry were based on the measurements of the present study. Theoretical models were developed to estimate the cyclic variation in elastohydrodynamic film thickness and coefficient of friction for the ankle during walking. Theoretical minimum film thicknesses of about 1 um were estimated along with coefficients of friction up to 0.001. The theoretical predictions of the cyclic variation of film thickness remained small compared with the magnitude of the film thickness itself. Furthermore, the theoretical film thicknesses were smaller than the measured Ra roughnesses for cartilage which appear in the literature. When a very considerable increase in the bulk viscosity of the lubricant was introduced into the calculations film thicknesses of about 18 um and coefficients of friction up to 0.01 were estimated. This value for film thickness was sufficient to separate the surface asperities of healthy articular cartilage. Unless thin film mechanisms, such as an increased lubricant viscosity or micro-elastohydrodynamic lubrication act, the present study indicated that full fluid film lubrication cannot be sustained. However, the predicted film thicknesses were not much smaller than the surface roughness of cartilage and the ability to generate and preserve fluid films was found to be greatly enhanced by the entraining and squeeze film action. Thus, the modes of lubrication for normal human ankle joints must include a significant contribution from elastohydrodynamic lubrication.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Leeds
Year dc:date.issued
1981

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Medley, John.B.
Advisors dc:contributor.advisor
  • Dowson, D.
  • Wright, V.

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.565888

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Medley, John.B.. The lubrication of normal human ankle joints. doctoral thesis, University of Leeds, 1981.